switch-info-show

This command displays information about the switch.

Syntax   switch-info-show

Defaults   None.

Access   CLI

History   

Version 1.2.1

Command introduced.

Version 3.0.0

Parameters for disk information added.

Usage   Use this command to display information about the switch.

Examples  To display information about the switch, use the following command:

CLI (network-admin@switch) > switch-info-show

switch:              draco-dev01

model:               S6000-ON

chassis-serial:      1741PN8500213

cpu1-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu2-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu3-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

cpu4-type:           Intel(R) Atom(TM) CPU S1220   @ 1.60GHz

system-mem:          7.66G

switch-device:       OK

fan1-status:         OK

fan2-status:         OK

fan3-status:         OK

fan4-status:         OK

fan5-status:         OK

fan6-status:         OK

ps1-status:          OK

ps2-status:          FAULT

disk-model:          16GB SATA Flash Drive                   

disk-firmware:       SFDDA01C

disk-size:           14.9G

disk-type:           Solid State Disk, TRIM Supported

bios-vendor:         American Megatrends Inc.

bios-version:        4.6.5


Informational Note:  The show output information varies from platform to platform.

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south