topology-vle-show
This command is used to display the vLE, the node and the node ports between which the vLE needs to be set up.
Syntax topology-vle-show
|
name name-string |
The name of the topology. |
|
vle-name vle-name-string |
The vLE name. |
|
node1 fabric-node name |
Name for the first fabric node. |
|
node2 fabric-node name |
Name for the second fabric node. |
|
node-1-port node-1-port-number |
The port number on first node. |
|
node-2-port node-2-port-number |
The port number on second node. |
|
vlan 0..4095 |
The VLAN for vLE. |
|
vxlan 0..16777215 |
The VXLAN for vLE. |
Defaults None
Access CLI
History
|
Version 7.0.0 |
Command introduced. |
Usage Use this command to display vLEs in a topology.
Examples To display vLEs in a topology, use the following syntax:
CLI (network-admin@switch) > topology-vle-show