Netvisor ONE Command Reference A-Z

owner node name 

Displays the owner name.

mac mac-address

Displays the MAC address of the vPort.

vnet vnet-name

Displays the vNET name.

bd bridge-domain name

Bridge Domain assigned to vPort.

vlan vlan-id

Displays a VLAN from 0 to 4095.

inner-vlan 0..4095

Q-in-Q inner VLAN assigned to vPort.

public-vlan 0..4095

Displays the ID of the public VLAN.

vxlan vxlan-id

Displays a VXLAN from 0 to 16777215.

ip ip-address

DisplaysDisplays an IP address.

num-ips num-ips-number

Displays the number of IP addresses for the vPort.

config-intf config-intf-number

Displays the configuration interface number.

intf intf-number

Port that owns the vPort

ports port-list

Displays the list of ports.

state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete 

Displays the vPort state.

svc-name svc-name-string

Displays the name of the vCenter connection service.

hostname hostname-string

Displays the hypervisor or switch host name.

entity entity-string

Displays the VM or KVM device name.

power none|powered-off|powered-on|standby|suspended|unknown

Displays the vPort entry status.

cpus cpus-number

Displays the number of CPUs assigned to the VM.

os os-string

Displays an operating system, such as CentOS or Ubuntu, on the VM.

portgroup portgroup-string

Displays the port group name associated with the VM MAC address.

pg-vlans vlan-list

Displays the VLANs assigned to a port group.

vswitch vswitch-string

Displays the name of the virtual switch associated with a NIC.

vs-type none|host-vs|distributed-vs|
unknown

Displays the type of virtual switch.

vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL|    rep|p-NFC|r-NFC|mgmt|unknown

Displays the type of vNIC associated with the VM or VM-Kernel.

config none|owner|ip|port|hostname|entity|cpus|os

Displays the configuration type for the virtual switch.

rem-switch node name

Displays the name of the remote switch.

rem-intf rem-intf-number

Displays the remote interface number.

rem-ports port-list

Displays the remote switch ports.

peer-intf peer-intf-number

Displays the peer interface number.

peer-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|        active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw| evpn-delete

Displays the state of the peer vPorts.

peer-owner-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|        peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|        evpn-wo-bgp|evpn-def-gw|evpn-delete

Displays the state of the peer owner vPorts.

status phy-up|up|disabled|hw-nat-loop|mirror-loop|mirror-to|PN-switch|PN-fabric|PN-other|PN-cluster|PN-internal|host|uplink|STP-BPDUs|LLDP|trunk|l3-port|remote-l3-port|dhcp|        dhcpsvr|blocked|no-BPDU|LACP-PDUs|vlag-active|vlag-blocked|stp-edge-port|LACP-wait|LACP-fallback|adjacency-wait|        adjacency-check|vlag-wait|multicast-router|host-disabled|loop|congested|vxlan-loopback|vlan-up|vle|vle-wait|phy-down|down|enabled|err-disabled|err-bpdu-guard|mac-violation|stp-bpdu-guard|stp-root-guard|defer-bringup-wait

Displays the vPort status.

vtep-ip ip-address

Displays the VTEP IP address.

tunnel tunnel-string

Displays the vPort tunnel.

create-time date/time: yyyy-mm-ddTHH:mm:ss

Displays the vPort create time.

last-seen date/time: yyyy-mm-ddTHH:mm:ss

Displays the last time the vPorts was seen.

vxlan-lru date/time: yyyy-mm-ddTHH:mm:ss

Displays the time and date of the VXLAN LRU.

hit hit-number

Displays the number of hits.

migrate migrate-number

Displays the number of times the entry migrated.

drops drops-number

Displays the number of dropped packets.

hw-index hw-index-number

Displays the hardware index number.

rt-if rt-if-string

Displays the router interface.

hw-flags invalid-vlan|invalid-port

Displays hardware flags.

mc-index mc-index-number

L2 multicast group index in hardware.

Version 2.2

Command introduced.

Version 2.2.6

The parameters, stp-edge-port|LACP-wait| adjacency-wait|adjacency-check|vlag-wait|multicast-router, added.

Version 2.3

The parameters, num-ips and vm-status, added.

Version 2.4.1

The parameter, public-vlan, added.

Version 2.6.2

The parameter, svc-name, power, entity, portgroup, pg-vlans, vswitch, vs-type, and vnic-type, added.

The parameters, hypervisor, vm-id, vm-name, vm-flavor, vm-status, memory, deprecated.

Version 3.0.0

The options, anycast, invalid-vlan, and owner-lost, added to state, peer-state, and peer-owner-state.

Version 3.1.0

The parameters vtep-ip and ND added.

Version 6.1.0

The options evpn, evpn-wo-bgp, evpn-def-gw, evpn-delete added to state, peer-state, and peer-owner-state.