vrf-mroute-show
This command displays information about distrbuted multicast forwarding in a L3/VXLAN network.
Syntax vrf-mroute-show
|
type <*,G>|<*,G,V>| |
Displays the hardware router type. |
|
srcip ip-address |
Displays the source IP address. |
|
srcip-mask srcip-mask-number |
Displays the source netmask. |
|
group ip-address |
Displays the group IP address. |
|
group-mask group-mask-number |
Displays the netmask. |
|
vnet vnet name |
Displays the vNET name. |
|
bd bridge-domain name |
Displays the bridge domain name. |
|
vlan vlan-id |
Displays the VLAN ID. |
|
vrid vrid-number |
Displays the vRouter ID. |
|
hw-group-id hw-group-id-number |
Displays the hardware group ID. |
|
send_vnet vnet name |
Displays the sending vNET name. |
|
send-vlan vlan-id |
Displays the sending VLAN ID. |
|
send-bd send-bd-string |
Displays the sending bridge domain. |
|
ports port-list |
Displays the port list. |
|
encap-id encap-id-number |
Displays the encapsulation ID. |
|
flags Trunk|Active |
Displays the hardware flags. |
Defaults None
Access Network Administrator
History Command introduced in Version 5.1.0.
Usage Use this command to display multicast information on virtual routing and fowarding.
Examples To display multicast routing, use the following syntax:
CLI (network-admin@switch) > vrf-mroute-show
type srcip group vnet bd vlan vrid hw-group-id send_vnet send-vlan send-bd ports encap-id flags
------- ------- --------- ---- -- ---- ---- ----------- --------- --------- ------- ----- -------- ------
<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 10 none -1 Active
<*,G,V> 0.0.0.0 225.1.1.1 10 0 0x2000009 0 19 4 Active