Netvisor ONE Command Reference A-Z

vrouter-name name-string

Specifies the name of the vRouter.

Specifies the following BGP neighbor arguments:

neighbor ip-address

Specifies the IP address of the neighbor.

l3-port l3-port-number

Specifies the Layer 3 port used for BGP.

ver ver-number 

Specifies the BGP version.

remote-as remote-as-number

Specifies the AS number of the remote connection.

msg_rcvd msg_rcvd-number

Specifies the number of messages received from the receive socket buffer.

msg_sent msg_sent-number

Specifies the number of messages written to the transmit socket buffer.

tblver tblver-number

Specifies the version of the routing table.

inQ inQ-number

Specifies the number of BGP packets queued for a neighbor.

outQ outQnumber

Specifies the number of BGP packets queued for transmission to a neighbor.

up/down up/down-string

Specifies if the neighbor is up or down.

state/pfxrcd state/pfxrcd-string

Specifies the current state of the BGP session. The state can be any of the following types:

• 1 — Idle

• 2 — Connect

• 3 — Active

• 4 — OpenSent

• 5 — OpenConfirm

• 6 — Established

remote-router remote-router-string

Specifies the neighbor router name.

multi-protocol ipv4-unicast|ipv6-unicast|l2vpn-evpn

Specify a multi-protocol for BGP.

description description-string

Specify a BGP neighbor description.

vrf vrf

Specify the name of VRF.

Version 2.0

Command introduced.

Version 2.4.1

The parameter, remote-router, added.

Version 5.1.3

The parameter, l3-port, added.

Version 6.0.0

The parameter, description, added.

Version 6.1.0

The option, l2vpn-evpn, added to the multi-protocol parameter.