vrouter-rip-routes-show
This command displays RIP routes currently installed on vRouter services on a fabric, cluster, virtual network (vNET), or standalone switch.
Syntax vrouter-rip-routes-show
|
vrouter-name name-string |
Specifies the name of the vRouter service. |
|
network ip-address |
Specifies the IP address. |
|
netmask netmask |
Specifies the netmask of the IP address. |
|
next-hop ip-address |
Specifies the next hop IP address. |
|
metric metric-number |
Specifies the metric assigned to the route. |
|
source ip-address |
Specifies the source IP address. |
|
tag tag-numbers |
Specifies the tag number. |
|
type rip|connected|static|ospf|bgp|missing|kernel-route|igmp|babel|pim|ospf6 |
Specifies the type of connection. |
|
attribute normal|static|default|redistribute|interface |
Specifies the attribute for the connection. |
Defaults None.
Access CLI.
History Command introduced in Version 2.2.
Usage This command displays information about RIP routes installed on the vRouter.
Examples To display RIP information on all vRouter services, use the following command:
CLI (network-admin@switch) > vrouter-rip-routes-show layout verticalz