Changing Switch Setup Parameters

You can modify the following switch parameters by using the switch-setup-modify command:

• Switch name
• Management IPv4 and IPv6 addresses
• Management IPv4 and IPv6 netmasks
• Management IPv4 and IPv6 address assignments
• In-band IPv4 and IPv6 addresses
• In-band IPv4 and IPv6 netmasks
• Gateway IPv4 and IPv6 addresses
• Loopback IPv4 and IPv6 addresses
• Primary and secondary IPv4 addresses for DNS services
• Domain name
• NTP server and NTP secondary server
• Timezone
• End User License Agreement (EULA) acceptance and timestamp
• Password
• Date
• Enable or disable host ports
• Message of the Day (MOTD)
• Banner
• Management interface LAG: enable or disable
• LACP mode of the management interface
• NTP enable or disable
• IEEE 802.1X authentication of the management interface (when not part of a LAG)

For example if you want to change the date and time on the switch, use the command:

CLI (network-admin@switch-1) > switch-setup-modify date 2020-01-28 T22:14:27

To view the changed date (see bold in output), use the show command: 

CLI (network-admin@sw-leaf1) > switch-setup-show

switch-name:               sw-leaf1

mgmt-ip:                   10.0.0.01/23

mgmt-ip-assignment:        static

mgmt-ip6:                  aa80::aab4:bbff:fffc:aa65/64

mgmt-ip6-assignment:       autoconf

mgmt-link-state:           up

mgmt-link-speed:           1g

in-band-ip:                10.168.0.02/24

in-band-ip6:               aa80::640a:94ff:ff52:aa9d/64

in-band-ip6-assign:        autoconf

gateway-ip:                10.0.0.1

dns-ip:                    10.10.0.13

dns-secondary-ip:          172.10.0.4

domain-name:               pluribusnetworks.com

ntp-server:                0.ubuntu.pool.ntp.org

ntp-secondary-server:      1.ubuntu.pool.ntp.org

timezone:                  America/Los_Angeles

date:                      2020-01-28,22:14:27

hostid:                    184556370

location-id:               6

enable-host-ports:         yes

banner:                    * Welcome to Pluribus Networks Inc. Netvisor(R). This is a monitored system.    device-id: 6K1K0Z1 banner: * ACCESS RESTRICTED TO AUTHORIZED USERS ONLY 

banner:                    * By using the Netvisor(R) CLI,you agree to the terms of the Pluribus Networks  banner: * End User License Agreement (EULA). The EULA can be accessed via 

banner:                    * http://www.pluribusnetworks.com/eula or by using the command "eula-show"     *