Configuring BGP Route Maps for Origin
Use the vrouter-route-map commands to define the conditions for redistributing routes from one routing protocol to another. The route-map command contains a list of match and set commands associated with it.
The match commands specify the match criteria: the conditions under which Netvisor ONE redistributes the current route-map command.
The set commands specify the set actions: the particular redistribution actions to perform if the criteria enforced by the match commands are met.
CLI (network-admin@switch) > vrouter-route-map-modify vrouter-name vr2 name TEST6 seq 10 origin <tab>
none |
Resets the origin to none. |
egp |
Specifies the route as a remote EGP route. |
igp |
Specifies the route as a local IGP route. |
incomplete |
Route is of unknown heritage. |