Layer 3 Table Validation
Layer 3 entries can become unsynchronized between the software table and the hardware table when you modify routes while the routes update in the network.
Use the l3-setting-modify command to automatically check Layer 3 entries:
CLI (network-admin@spine1) > l3-setting-modify
One or more of the following options: |
|
aging-time seconds |
Specify the aging-time for Layer 3 entries, use 0 to disable aging. |
convergence-time seconds |
Specify the unicast convergence time on bootup (seconds) |
l3-checker|no-l3-checker |
Specify if you want to check Layer 3 consistency |
l3-checker-interval duration: #d#h#m# |
Specify the interval for Layer 3 consistency checker |
l3-checker-fix|no-l3-checker-fix |
Enable fixing of inconsistent entries |
Netvisor ONE uses two commands to manually check and fix Layer 3 inconsistencies:
CLI (network-admin@spine1) > l3-check-show
CLI (network-admin@spine1) > l3-check-fix