Sample CLI outputs
To display the SNMP details for the OID Ieee8021SpanningTreeEntry, with the community-string community1, use the command:
CLI (network-admin@cetus-colo-01) > switch-local snmp-show community-string community1 name Ieee8021SpanningTreeEntry show-type walk show-interval 1
switch name value
------------- ------------------------------------------------- ----------------------------------------
cetus-colo-01 ieee8021SpanningTreeProtocolSpecification.1 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreeProtocolSpecification.144 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreeProtocolSpecification.4093 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreePriority.1 INTEGER: 8193
cetus-colo-01 ieee8021SpanningTreePriority.144 INTEGER: 8336
cetus-colo-01 ieee8021SpanningTreePriority.4093 INTEGER: 12285
cetus-colo-01 ieee8021SpanningTreeTimeSinceTopologyChange.1 Timeticks: (0) 0:00:00.00 centi-seconds
cetus-colo-01 ieee8021SpanningTreeTimeSinceTopologyChange.144 Timeticks: (0) 0:00:00.00 centi-seconds
cetus-colo-01 ieee8021SpanningTreeTimeSinceTopologyChange.4093 Timeticks: (0) 0:00:00.00 centi-seconds
cetus-colo-01 ieee8021SpanningTreeTopChanges.1 Counter64: 0 topology changes
cetus-colo-01 ieee8021SpanningTreeTopChanges.144 Counter64: 0 topology changes
cetus-colo-01 ieee8021SpanningTreeTopChanges.4093 Counter64: 0 topology changes
cetus-colo-01 ieee8021SpanningTreeDesignatedRoot.1 Hex-STRING: 66 0E 94 D2 AF 08
cetus-colo-01 ieee8021SpanningTreeDesignatedRoot.144 Hex-STRING: 66 0E 94 D2 AF 08
cetus-colo-01 ieee8021SpanningTreeDesignatedRoot.4093 Hex-STRING: 66 0E 94 D2 AF 08
cetus-colo-01 ieee8021SpanningTreeRootCost.1 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreeRootCost.144 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreeRootCost.4093 INTEGER: 0
cetus-colo-01 ieee8021SpanningTreeRootPort.1 Gauge32: 0
cetus-colo-01 ieee8021SpanningTreeRootPort.144 Gauge32: 0
cetus-colo-01 ieee8021SpanningTreeRootPort.4093 Gauge32: 0
cetus-colo-01 ieee8021SpanningTreeMaxAge.1 INTEGER: 20 centi-seconds
To display the SNMP details for the OID, pnHRCpuTable, with the community-string community1, use the command:
CLI (network-admin@aquila-m) > snmp-show community-string community1 name pnHrCpuTable show-type walk
switch name value
-------- --------------- ------------
aquila-m pnHrCpuIdx.0 INTEGER: 0
aquila-m pnHrCpuUsr.0 INTEGER: 0
aquila-m pnHrCpuSys.0 INTEGER: 0
aquila-m pnHrCpuIdle.0 INTEGER: 99
aquila-m pnHrCpuTotal.0 INTEGER: 0
To display the system details including the cpu-total output, use the command:
CLI (network-admin@Leaf1) > system-stats-show format all layout vertical
switch: Leaf1
uptime: 1d1h42m29s
used-mem: 62%
used-mem-val: 9.19G
used-swap: 0%
used-swap-val: 0
paging: 0
cpu-user: 8%
cpu-sys: 12%
cpu-total: 21%
cpu-idle: 78%
To display the accumulated port statistics for SNMP, use the port-stats-snmp-show command:
CLI (network-admin@switch1) > port-stats-snmp-show
switch: switch1
port: 12
ibits: 0
iUpkts: 0
iBpkts: 0
iMpkts: 0
iCongDrops: 0
ierrs: 0
obits: 174M
oUpkts: 1.32K
oBpkts: 801
oMpkts: 73.6K
oCongDrops: 0
oerrs: 0
mtu-errs: 0
switch: switch1
port: 21
ibits: 374M
iUpkts: 37.3K
iBpkts: 579
iMpkts: 199K
iCongDrops: 0
ierrs: 0
obits: 360M
oUpkts: 37.3K
oBpkts: 0
oMpkts: 174K
oCongDrops: 0
oerrs: 0
mtu-errs: 0
....
To display the modified system information, for example, if you modified the system contact to bob@xyz.com with location as brisbane, use the snmp-system-show command:
CLI (network-admin@switch-04) > snmp-system-show
switch: switch-04
syscontact: bob@xyz.com
syslocation: brisbane
You can also view the details using an SNMP walk.