Post Installation Configuration
After installation and activation is complete you can proceed to configure the switches for your network.
The Pluribus Data Center Interconnect Validated Design Guide provides a practical guide to create validated leaf-spine architectures.
The Pluribus Networks Netvisor ONE Configuration Guide provides an authoritative guide to the many features of Netvisor ONE. Basic knowledge of the management CLI is assumed; use the Configuration Guide to review CLI syntax and structure.
The overall procedure to configure Netvisor ONE based on the Validated Design Guide is as follows:
1)Review the topology and design considerations
oIP and VLAN scheme
2)Completing the initial switch setup
oSetup wizard runs automatically upon first login (default login/password: pluribus/admin)
oSet the timezone
oOther management interface parameters may need to be configured
oReview NTP server information to be used for time sync
3)Creating the ONVL Fabric
ofabric-create command or fabric-join command
For more details on configuring the Netvisor ONE features, see the Configuration Guide.