bezel-portmap-show

This port is used to display physical to logical port mapping on the Dell platform. All ports are 40G ports that can be split into 4 logical 10G ports.

Syntax   bezel-portmap-show 

port port-number

The logical port number.

bezel-intf bezel-intf-string

Specify a bezel interface number.

Defaults   None

Access   Network-admin

Usage   Use this command to display the physical to logical port mapping on a Dell platform.

Examples  To display port mapping on the Dell platform, use the following syntax:

CLI (network-admin@switch) > bezel-portmap-show

switch  port bezel-intf

------- ---- ----------

s6000-2 1    1          

s6000-2 2    1.2        

s6000-2 3    1.3        

s6000-2 4    1.4        

s6000-2 5    2          

s6000-2 6    3          

s6000-2 7    3.2        

s6000-2 8    3.3        

s6000-2 9    3.4        

s6000-2 10   4          

s6000-2 11   5          

s6000-2 12   5.2        

s6000-2 13   5.3        

s6000-2 14   5.4        

s6000-2 15   6          

s6000-2 16   7          

s6000-2 17   7.2        

s6000-2 18   7.3        

s6000-2 19   7.4

 

From the output above, you can determine that port 1 has no cables connected to it. However port 2, has a 40G cable connected to another switch on the network. This is indicated by a single port number instead of 4 port numbers.

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south