igmp-static-source-create

This command creates a static IP address as the IGMP source on the network.

Informational Note:  IGMPv1 is not supported in nvOS. If you are using IGMPv1, you must disable IGMP snooping on the Pluribus Networks switch.


Syntax   igmp-static-source-create

source-ip ip-address

Specify the source IP address. This is a unicast IP address.

group-ip ip-address

Specify the group IP address for IGMP.

vlan vlan-id

Specify the VLAN identifier.

Specify the following option:

vnet vnet-name

Specify the name of the vNET assigned to the IGMP static source.

bd bridge-domain name

Specify the bridge domain name.

ports port-list

Specify the list of ports.

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.4.1

The parameter vnet added.

Version 3.0.0

The parameter l2-net added.

Version 5.1.1

The parameter l2-net deprecated.

Usage   IGMP groups are used to determine the reception state for a specific multicast address. This allows the switch to determine if any switches need messages sent from a multicast group. Use this command to create an IGMP static IP address as the source.

Examples  To add the static source 12.0.0.1 as the static source, use the following command:

CLI (network-admin@switch) > igmp-static-source-create source-ip 12.0.0.1 group-ip vlan 202 ports 55-57

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south