l3-table-show
This command allows you to display the Layer 3 table settings.
Syntax l3-table-show
|
Specify one or more of the following options: |
|
|
mac mac-address |
The MAC address. |
|
ip ip-address |
The IP address. |
|
vnet vnet-name |
Name of the vNET. |
|
bd bridge-domain name |
The bridge domain. |
|
vlan 0..4095 |
The VLAN ID. |
|
public-vlan 0..4095 |
The public VLAN assigned to the vPort |
|
vxlan 0..16777215 |
The assigned VXLAN. |
|
intf intf-number |
The interface. |
|
rt-if rt-if-string |
The router interface. |
|
hw-intf hw-intf-number |
Displayss the interface programmed in hardware. |
|
state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete |
The flags. |
|
owner-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete |
The owner-state flags. |
|
peer-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac| hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active| hsrp |
The peer-state flags. |
|
egress-id egress-id-number |
The hardware egress ID. |
|
create-time date/time: yyyy-mm-ddThh:mm:ss |
The time entry created. |
|
last-seen date/time: yyyy-mm-ddThh:mm:ss |
The last time seen on network. |
|
hit hit-number |
The number of hits. |
|
tunnel tunnel-string |
The tunnel name. |
Defaults None
Access CLI
History
|
Version 2.4 |
Command introduced. |
|
Version 2.4.1 |
The parameters public-vlan, owner-state, peer-state and tunnel added. The options user-flush|vxlan-loopback|router added to parameters state, owner-state, and peer-state. |
|
Version 2.6.2 |
The parameters hw-intf and egress-id added. The options update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|hsrp added to parameters state, owner-state, and peer-state. |
|
Version 3.0.0 |
The parameter l2-net added. |
Usage Use this command to show the Layer 3 table setting.
Examples To display the Layer 3 table setting, use the following command:
CLI (network-admin@switch) > l3-table-show
switch mac ip vlan state
------ ----------------- ------------- ---- ------
switch 00:12:c0:80:3b:3d 1.1.1.1 1
switch 00:12:c0:80:3b:27 1.1.1.2 1
switch 66:0e:94:9c:8b:ef 10.0.62.1 62
switch 66:0e:94:70:15:f9 10.0.62.2 62
switch 66:0e:94:9c:8a:1c 192.168.25.31 1 active
switch 66:0e:94:6f:b9:3f 192.168.25.32 1
switch 66:0e:94:70:e0:16 192.168.25.33 1 active
switch 00:12:c0:80:3b:3d 192.188.1.110 1
switch 00:12:c0:80:3b:27 192.188.1.120 1
switch 66:0e:94:9c:8b:ef 2001:62::1 62
switch 66:0e:94:70:15:f9 2001:62::2 62
switch 66:0e:94:9c:8b:ef fe80::62:1 62
switch 66:0e:94:70:15:f9 fe80::62:2 62