port-association-show

Use this command to display port associations.

Syntax   port-association-show

name name-string

Name for the port association.

master-ports port-list

A list of ports to act as master ports.

slave-ports port-list

A list of ports to act as slave ports.

policy all-masters|any-master

A policy for the port association.

virtual-wire|no-virtual-wire

Specify if you want the associated ports to form a “virtual wire”. Once you put the switch into virtual wire mode, you disable all other features on the switch.

bidir|no-bidir

Specify if you want the port state tracking to be bi-directional or not.

monitor-ports port-list

A list of ports not used by port association to monitor.

enable|no-enable

Specify if you want to enable port association in hardware.

Defaults   None

Access   CLI

History   

Version 2.2.6

Command introduced.

Version 2.4

The parameter virtual-wire, and bidir added.

Version 2.5.2

The parameter monitor-ports added.

Version 3.0.0

The parameter enable added.

Usage   Use this command to display port associations.

Examples  To display a port association, with a master port of 45, and slave port of 6, use the following command:

CLI (network-admin@switch) > port-association-show 

name                     master-ports slave-ports policy      virtual-wire bidir enable

------------------------ ------------ ----------- ----------- ------------ ----- ------

_PA_PATH_eri-scorp2-path 45           6           all-masters true         false enable


north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south