port-breakout-config-modify

This command is used to configure the port breakout mode.

Syntax   port-breakout-config-modify

port port-list

Specifies the port number or list of ports.

breakout sys-default|400g-1x|100g-4x|100g-2x

Specify the port breakout mode:

System-default: each bezel port is 400G/PAM4 for the first two entries, then 100G/PAM4 for third entry, and 100G/NRZ for fourth entry.

Defaults   None

Access   CLI

History   

Version 7.0.1

Command introduced.

Usage   Use this command to modify the port breakout configuration.

Information  This command is applicable only on Z9432F-ON platform in Netvisor ONE version 7.0.1.

Examples  To set the port speed, use the following command:

CLI (network-admin@switch) > port-config-modify port 5 speed 100g

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south