port-xcvr-breakout-ability-show
This command to display the available XCVR breakout modes.
Syntax port-fec-mode-modify
|
port port-list |
The port number or list of ports. |
|
port(s) port-list |
The list of logical breakout port(s). |
|
bezel-port bezel-port-string |
The associated bezel port. |
|
vendor-name vendor-name-string |
The transceiver vendor name. |
|
part-number part-number-string |
The transceiver part number. |
|
breakout sys-default|400g-1x|100g-4x|100g-2x |
The port breakout mode. |
|
avail Yes|No |
Specifies whether Breakout is available via Netvisor ONE. |
|
advert advert-string |
The CMIS application descriptor record number. |
|
app-record-hex app-record-hex-string |
The Raw hex application record. |
|
host-ifc host-ifc-string |
The Host Interface. |
|
media-type media-type-string |
The media Type. |
|
media-ifc media-ifc-string |
The media Interface. |
|
status status-string |
The sys-default and current breakout flags. |
Defaults None
Access CLI
History
|
Version 7.0.1 |
Command introduced. |
Usage Use this command to display the available XCVR breakout modes.
Information This command is applicable only on Z9432F-ON platform in Netvisor ONE version 7.0.1.
Examples To display an optical module with 2 app records on port 17, use the following command:
CLI (network-admin@switch) > port-xcvr-breakout-ability-show port 17
port(s) bezel-port vendor-name part-number breakout avail advert host-ifc media-type status
------- ---------- ----------- ----------- -------- ----- ------ ---------- ---------- -----------
17 5 DELL EMC TP2F0 400g-1x Yes app-01 400G-GAUI8 mmf sys-default
17,19 5 DELL EMC TP2F0 200g-2x Yes app-02 200G-GAUI4 mmf current