Netvisor ONE Command Reference A-Z

Specify any of the following options:

time date/time: yyyy-mm-ddThh:mm:ss

Specifies a time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

start-time start-time

Specifies a start time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

end-time end-time

Specifies an end time for the packet count statistics using the timestamp format YYYY-MM-DDTHH:MM:SS, where:

• YYYY specifies the 4 digit calendar year;

• MM specifies the 2 digit month of the year;

• DD specifies the 2 digit day of the month;

• HH specifies the 2 digit time of the day (24H notation);

• MM specifies the 2 digit minute of the hour;

• SS specifies the 2 digit second of the minute.

duration duration

Specifies the duration in seconds.

interval duration: #d#h#m#s

Specifies the interval between statistics collection.

since-start|
no-since-start

Specifies if the statistics are collected from the start of collecting statistics.

older-than duration: #d#h#m#s

Specifies if the statistics are older than the duration in days, hours, minutes, and seconds.

within-last duration: #d#h#m#s

Specifies if the statistics are within the duration in days, hours, minutes, and seconds.

port port-list

Specifies one or more switch network data port numbers. The port number must be in the range of 1 to 64. Multiple ports can be specified as a comma-separated list of numbers or a range (-).

name name-string

Specifies the name of the trunk.

description description-string

Specifies the physical port description.

counter counter-number

Specifies the counter number.

ibytes ibytes-number

Specifies the incoming number of bytes.

ibits ibits-number

Specifies the number of incoming bits.

iUpkts iUpkts-number

Specifies the number of incoming unicast packets.

iBpkts iBpkts-number

Specifies the number of incoming broadcast packets.

iMpkts iMpkts-number

Specifies the number of incoming multicast packets.

iPauseFs iPauseFs-number

Specifies the number of incoming pause frames.

iCongDrops iCongDrops-number

Specifies the number of incoming packets dropped due to congestion.

idiscards idiscards-number

Specifies the number of incoming packets discarded.

ierrs ierrs-number

Specifies the number of incoming errors.

obytes obytes-number

Specifies the number of outgoing bytes.

obits obits-number

Specifies the number of outgoing bits.

oUpkts oUpkts-number

Specifies the number of outgoing unicast packets.

oBpkts oBpkts-number

Specifies the number of outgoing broadcast packets.

oMpkts oMpkts-number

Specifies the number of outgoing multicast packets.

oPauseFs oPauseFs-number

Specifies the number of outgoing pause frames.

oCongDrops oCongDrops-number

Specifies the number of outgoing packets dropped due to congestion.

odiscards odiscards-number

Specifies the number of outgoing discarded packets.

oerrs oerrs-number

Specifies the number of outgoing errors.

mtu-errs mtu-errs-number

Specifies the number of MTU errors.

HER-packets HER-pts-number 

Specifies the number of Head End Replicated (HER) packets.

HER-bytes HER-bytes-number

Specifies the number of Head End Replicated (HER) bytes.

HER-bits HER-bits-number

Specifies the number of Head End Replicated (HER) bits.

port-speed disable|10m|100m|1g|2.5g|10g|25g|40g|50g|100g

Specifies the port speed.

Rx-bw-th-exceed-count Rx-bw-th-exceed-count-number

Specifies the count of RX bandwidth threshold exceed events.

Tx-bw-th-exceed-count Tx-bw-th-exceed-count-number

Specifies the count of TX bandwidth threshold exceed events.

Version 7.0.0

Command introduced.