vcenter-connection-show
Netvisor now provides vCenter Connection Service that allows you to connect to VMware vCenter. This command allows user to display a vCenter connection.
Syntax vcenter-connection-show
|
name name-string |
Name for the vCenter connection. |
|
host host-string |
The host name of the VMware vCenter server. |
|
user user-string |
A valid user on the VMware vCenter server |
|
password password-string |
A valid password for the user on the VMware vCenter server. |
|
enable|disable |
Specifies whether to enable or disable the connection. |
|
vlans vlan-list |
A list of VLANs for auto-provisioning of vCenter. |
|
network-provisioning none|l2-underlay|l3-underlay |
The type of network provisioning for the connection. |
Defaults None
Access Network Administrator
History
|
Version 2.5.2 |
Command introduced. |
|
Version 2.5.3 |
The parameter vlans added. |
|
Version 2.6.2 |
The parameter network-provisioning added. |
Usage Use this command to display information about a connection from a Netvisor switch to a VMware vCenter server.
Examples To display a vCenter connection, use the following syntax:
CLI (network-admin@switch) > vcenter-connection-show
switch name host user enable state connected-time vlans
-------- ---- ----------- -------------------------- ------ ----- -------------------------------- -----------
switch-1 svc2 10.9.34.204 administrator@lab.pluribus yes ok connected at 2017-01-14 03:07:23 20-30,33-40
switch-2 svc2 10.9.34.204 administrator@lab.pluribus yes ok connected at 2017-01-14 03:07:21 20-30,33-40