vflow-stats-clear

This command displays flow statistics for Layer 2 Ethernet or Layer 3 Internet Protocol (IP) traffic.

Syntax   vflow-stats-clear

Specify any of the following options:

start-time yyyy-mm-ddThh:mm:ss

Specify the start time of the flow using the notation yyyymm-

ddThh:mm:ss.

end-time yyyy-mm-ddThh:mm:ss

Specify the start time of the flow using the notation yyyymm-

ddThh:mm:ss

dur duration-number

Specify the duration of the flow (in seconds).

interval duration: #d#h#m#s

Specify the length of time between collection intervals.

since-start|no-since-start

Specify if the statistics are collected from the start of the vflow.

older-than duration: #d#h#m#s

Specify if the statistics are older than the stated duration.

within-last duration: #d#h#m#s

Specify the statistics collected within the last duration.

name vflow name

Specify the name of the vflow.

Specifyvnet vnet name

Specify the vNET.

id

Specify the ID assigned.

pkts pkts-number

Specify the total number of packets.

bytes bytes-number

Specify the total number of bytes.

cpu-pkts cpu-pkts-number

Specify the total number of CPU packets.

cpu-bytes cpu-bytes-number

Specify the total number of CPU bytes.

mismatches mismatches-number

Specify the number of mismatched packets.

drops drops-number

Specify the number of dropped packets.

drops-bytes drops-bytes-number

Specify the number of dropped bytes.

policer-drops policer-drops-number

Specify the number of policer dropped packets.

policer-drop-bytes policer-drop-bytes-number

Specify the number of policer dropped bytes.

cpu-tx-pkts cpu-tx-pkts-number

Specify the number of packets sent from the CPU.

cpu-tx-bytes cpu-tx-bytes-number

Specify the number of bytes sent from the CPU.

Defaults   None.

Access   CLI

History   

Version 2.4.0

Command introduced.

Version 2.6.2

The parameters policer-drops, policer-drop-bytes, cpu-tx-pkts, and cpu-tx-bytes added.

Usage   Each fabric, cluster, standalone switch, or virtual network can track application flow statistics. This command clears vFlow statistics.

Examples  This example shows how to clear vFlow statistics:

CLI (network-admin@switch) > vflow-stats-clear

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south