vlan-show
This command displays a list of existing VLANs or VXLANs on the switch.
Syntax vlan-show
|
id vlan-id |
The VLAN ID as a value from 0 to 4095. |
|
vnet vnet-name |
The vNET assigned to this VLAN. |
|
type public|private |
The VLAN type |
|
vxlan vxlan-id |
The VXLAN ID as a value from 0 to 16777215. |
|
auto-vxlan|no-auto-vxlan |
Displays if auto-vxlan is enabled or disabled. |
|
vxlan-mode standard|transparent |
The VXLAN mode as standard or transparent. |
|
vxlan-hybrid-mode standard|transparent |
VXLAN encapsulation mapping to tunnel in hybrid mode. |
|
hw-vpn hw-vpn-number |
The hardware VPN. |
|
hw-mcast-group hw-mcast-group-number |
The hardware multicast group. |
|
replicators vtep-group name|none |
The replicator group. |
|
repl-vtep ip-address |
The replicator VTEP. |
|
public-vlan vlan-id |
The ID of the public VLAN as a value from 0 to 4095. |
|
scope local|fabric |
The scope of the VLAN. |
|
description description-string |
Displays a description for the VLAN. |
|
active yes|no |
Displays if the VLAN is active on the network. |
|
stats|no-stats |
Displays if stats collection is enabled. |
|
vrg vrg-name |
The name of the VRG assigned to the VLAN. |
|
ports port-list |
The list of ports assigned to the VLAN. |
|
port-desc port-desc-string |
Specify the port description. |
|
untagged-ports port-list |
The list of untagged ports assigned to the VLAN. |
|
untagged-port-desc untagged-port-desc-string |
The untagged-port assigned to VLAN. |
|
active-edge-ports port-list |
Displays any active edge ports for the VLAN. |
Defaults None.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.4.1 |
The parameters vnet, type, vxlan, vxlan-mode, and public-vlan added. The option cluster added. |
|
Version 2.6.2 |
The parameter range added. |
|
Version 3.0.0 |
The parameter range deprecated. |
|
Version 6.0.0 |
The parameter auto-vxlan added. |
|
Version 7.0.0 |
The parameter port-desc added. |
Usage VLANs are used to isolate network traffic at Layer 2. Use this command to modify a VLAN.
Examples To display a list of VLANs, use the following command:
CLI (network-admin@switch) > vlan-show layout vertical
switch: leaf1
id: 1
type: public
auto-vxlan: no
replicators: none
scope: local
description: default-1
active: yes
stats: yes
ports: 2-72
untagged-ports: 2-69
active-edge-ports: 69-70