This command is used to display information about configured virtual network (vNET) manager interfaces.

Syntax   vnet-manager-interface-show

vnet-manager-name name-string

Name for the vNET manager interface.

Specify the following interface arguments:

nic nic-string

The NIC of the interface.

ip ip-address

The IP address of the interface.

netmask netmask

The netmask.

assignment none|dhcp|dhcpv6|autov6

The DHCP method.

mac mac-address

The MAC address of the interface.

vnet vnet-name

Name of the vNET.

vlan vlan-id

The VLAN identifier. This is a value between 1, and 4094.

vlan-type public|private

The VLAN type as public or private.

if mgmt|data|span

Specifies if the interface is a management, data or span interface.

alias-on alias-on-string

An alias for the interface.

vm-nic-type e1000|virtio

The type of virtual NIC.


Specifies if the interface is exclusive to the configuration. Exclusive means that other configurations cannot use the interface.


Specifies if the NIC is enabled or disabled.

nic-state down|up

Specifies if the NIC state is up or down. If the NIC is disabled, then the state is down.

vrrp-id id

The ID assigned to VRRP. Range is 0 - 255.

vrrp-primary vrrp-primary-string

The VRRP primary interface.

vrrp-priority number

The VRRP priority for the interface. Range is 0 - 254.

vrrp-adv-int ms

The VRRP Advertisement Interval. In ms, min 10, max 40950, default 1000.

secondary-macs secondary-macs-string

The secondary MAC address.

if-nat-realm internal|external

The NAT realm interface as internal or external.


Specify if you want to add a VLAN 0 priority tag on forwarded traffic.

Defaults   None.

Access   CLI


Version 1.2

Command introduced.

Version 2.1

The parameters exclusive, nic, and nic-state added.

Version 2.2.5

The parameters l3-port, and secondary-macs added.

Version 2.3.1 

The option, autov6 added.

Version 2.4

The parameter l3-port, deprecated.

Version 2.4.1

The parameter vlan-type, vnet, and public-vlan added.

Version 2.5

The parameters vnet and sriov-vf added.

Version 2.5.4

The parameters vrrp-id, vrrp primary, vrrp priority, and vrrp-adv-int added.

Version 2.6.2

The parameter if-nat-realm added.

Version 3.1.0

The parameter priority-tag added.

Usage   A virtual network manager interface (vNET manager) can administer a virtual network (vNET) but the same management abstraction can also be used to administer a fabric, cluster, or standalone switch. This command removes a vNET manager interface.

Examples  To display information about all vNET manager interfaces, use the following command:

CLI (network-admin@switch) > vnet-manager-interface-show