vpg-create

Netvisor ONE allows you to club the ingress or source ports, and the destination ports into Virtual Port Groups (vPGs). The vPG construct permits you to flood the traffic that arrives at select source ports to multiple desired destination ports. You must create vPGs to configure the Pluribus Network Packet Broker solution. This command creates vPGs.

Syntax   vpg-create

vnet vnet-name

Specify the vNET for this vPG.

name name-string

Specify the name of the vPG.

type source|destination|bidirectional

Specify the type of the vPG as source, destination or bidirectional.

ports port-list

Specify the ports assigned to the vPG.

port-desc port-desc-string

Specify a previously configured port description to add the port with that description to the vPG.

monitor-ports port-list

Specify the monitoring ports assigned to the vPG.

Defaults   None

Access   Network Administrator

History  

Version 6.0.0

Command introduced.

Version 6.1.0

Parameter vnet added.

Version 7.0.0

The parameters monitor-ports, and port-desc added.

Usage   Use this command to configure a vPG.

Examples  To configure the vPG, TAP-GROUP-1 with source type, use the following syntax:

CLI (network-admin@Leaf1) > vpg-create name TAP-GROUP-1 type source

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south