Netvisor ONE Command Reference A-Z

time date/time: yyyy-mm-ddThh:mm:ss

The point in tjme for displaying historical information.

start-time date/time: yyyy-mm-ddThh:mm:ss

The start time for vPort history collection.

end-time date/time: yyyy-mm-ddThh:mm:ss

The end time for vPort history collection.

duration duration: #d#h#m#s

The duration to collect the vPort history.

interval duration: #d#h#m#s

The intervals to collects vPort history.

since-start

Specifies to display all of the vPort history since collection began on the fabric.

older-than duration: #d#h#m#s

Specifies to display vPort information older than a specific duration.

within-last duration: #d#h#m#s

Specifies to display vPort information with a specific duration.

log-type l2-save|l3-save|restart|l2-modify|l2-delete|l3-modify|l3-delete

Filter output by the log type of each entry. The log-type column displays when a vPort is created, modified, saved, or deleted.

caller init|config|status|switch-cb|cluster|gre|ARP|router|flow-cb|vdp|vlag|port|inject|evict|vxlan|stats|vnm-vnic|adjacency|stp|trunk|intsw|ttl1|flood|flush|retire|loop|dhcp|fabric|table|l3-age-out|vlan|l2-checker|igmp|l2-age-out|port-mirror|mac-move|cluster-status|cluster-status-delete|vxlan-routing|subnet|br-dom|vrf|ND|VSG|excess-move-protection|retire-tunnel-up|evpnsnoop-browse 

The feature that made the change for this entry.

last-caller init|config|status|switch-cb|cluster|gre|ARP|router|flow-cb|vdp|vlag|port|inject|evict|vxlan|stats|vnm-vnic|        adjacency|stp|trunk|intsw|ttl1|flood|flush|retire|loop|dhcp|        fabric|table|l3-age-out|vlan|l2-checker|igmp|l2-age-out|port-mirror|mac-move|cluster-status|cluster-status-delete|vxlan-routing|subnet|br-dom|vrf|ND|VSG|excess-move-protection|retire-tunnel-up|evpnsnoop-browse

The most recent caller for this entry.

reason activate|deactivate|port-move|ip-move|ip-remove|batch-move|retire|break-loop|break-loop-timeout|create|modify|delete|policy|owner-status|remove-node|port-flags|check-owner|trunk-port-add|trunk-port-remove|move-router-if|age-out|hw-remove|restart|undo|flush|update-vxlan-vlan|needs-peer-status|owner-lost|owner-change|update-peer-only|        user-delete|done|vm-metadata|excess-move-state-change 

The reason for history entry.

last-reason activate|deactivate|port-move|ip-move|ip-remove|batch-move|retire|break-loop|break-loop-timeout|create|modify|delete|policy|owner-status|remove-node|port-flags|check-owner|trunk-port-add|trunk-port-remove|move-router-if|age-out|hw-remove|restart|undo|flush|update-vxlan-vlan|needs-peer-status|owner-lost|owner-change|update-peer-only|user-delete|done|vm-metadata|excess-move-state-change

The most recent reason for this entry.

changes owner|mac|vnet|bd|inner-vlan|public-vlan|vxlan|num-ips|config-intf|intf|ports|state|local-intf|local-ports|local-state|alt-owner|alt-owner-port|alt-owner-ports|alt-owner-state|svc-name|hostname|entity|power|cpus|os|portgroup|pg-vlans|vswitch|vs-type|vnic-type|config|rem-switch|rem-intf|rem-ports|peer-intf|peer-state|peer-owner-state|status|vtep-ip|tunnel|create-time|last-seen|last-seen-since|vxlan-lru|hit|migrate|drops|hw-index|rt-if|hw-flags|mc-index

The changes in this entry.

count count-number

Filter output by the number of entries summed using the sum-by argument.

owner node-name

The switch-id of the vPort.

mac mac-address

Filter output by the Filter output by MAC address.

vnet vnet-name 

vNET assigned to the vPort.

bd bridge-domain-name

Bridge Domain assigned to vPort.

vlan vlan-id

Filter output by the VLAN ID.

inner-vlan 0..4095

Q-in-Q inner VLAN assigned to vPort.

vxlan vxlan-id

Filter output by the VXLAN ID.

public-vlan vlan-id

Specify the ID of the public VLAN.

ip ip-address

Filter output by the IP address.

num-ips num-ips-number

The number of IP addresses for the vPort.

intf intf-number

Filter output by the interface number. This is the port or trunk number of the vPort.

config-intf config-intf-number

Filter output by the configured interface of the vPort.

ports port-list

Filter output by the list of ports.

state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete

Filter output by the state of the vPort.

svc-name svc-name-string

The vCenter connection service name.

hostname hostname-string

The host name of the switch.

entity entity-string

The VM or VM Kernel device name.

power none|powered-off|powered-on|standby|suspended|unknown

The vPort entry power status.

cpus cpus-number

Filter output by the number of CPUs assigned to the VM.

os os-string

Filter output by the OS installed on the VM.

portgroup portgroup-string

The Port Group name associated with VM MAC address.

pg-vlans vlan-list

The valid VLANs for the port group.

vswitch vswitch-string

The virtual switch name associated with the NIC.

vs-type none|host-vs|distributed-vs|unknown

The virtual switch type.

vnic-type untagged|tagged|trunked|vm-mgmt|vm-kernel|vMotion|vSAN|FTL|rep|p-NFC|r-NFC|mgmt|unknown

The type of vNIC attached to the VM or VM Kernel.

config none|owner|ip|port|hostname|entity|cpus|os

The VM configuration.

rem-switch node-name

Filter output by the remote switch name.

rem-intf rem-intf-number

Filter output by the remote interface number.

rem-ports port-list 

Filter output by the remote ports.

peer-intf peer-intf-number 

Filter output by the peer interface.

peer-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|evpn-wo-bgp|evpn-def-gw|evpn-delete

Filter output by peer-state.

peer-owner-state active|static|vrrp|tunnel|software|needs-peer-status|port-mac|hit|ageout-check|moving|loop-probe|local-tunnel|igmp-mac|user-flush|vxlan-loopback|router|update-peer-only|active-state-mismatch|peer-port-missing|peer-port-not-vlag|peer-port-not-orphaned|        peer-port-not-cluster-link|sw-active|anycast|hsrp|invalid-vlan|owner-lost|cluster-link-down|vxlan-router|peer-force-resync|excess-mac-move-detected|excess-ip-move-detected|retry|evpn|        evpn-wo-bgp|evpn-def-gw|evpn-delete

Filter output by owner state.

status phy-up|up|disabled|hw-nat-loop|mirror-loop|mirror-to|PN-switch|PN-fabric|PN-other|PN-cluster|PN-internal|host|        uplink|STP-BPDUs|LLDP|trunk|l3-port|remote-l3-port|dhcp|        dhcpsvr|blocked|no-BPDU|LACP-PDUs|vlag-active|vlag-blocked|stp-edge-port|LACP-wait|LACP-fallback|adjacency-wait|        adjacency-check|vlag-wait|multicast-router|host-disabled|loop|congested|vxlan-loopback|vlan-up|vle|vle-wait|phy-down|down|enabled|err-disabled|err-bpdu-guard|mac-violation|stp-bpdu-guard|stp-root-guard|defer-bringup-wait

Filter output by the status of the vPort.

vtep-ip ip-address

The VTEP IP address.

tunnel tunnel-string 

The vPort tunnel.

create-time date/time: yyyy-mm-ddThh:mm:ss

Filter output by the time that the vPort was created.

last-seen date/time: yyyy-mm-ddThh:mm:s

Filter output by the time that the vPort was last seen on the fabric.

vxlan-lru date/time: yyyy-mm-ddTHH:mm:ss

Filter output by the VXLAN LRU.

hit hit-number

Filter output by the number of received hits.

migrate migrate-number

Filter output by the number of times that the vPort migrated on the fabric.

drops drops-number

Filter output by the number of drops on the fabric.

hw-index hw-index-number

Filter by the hardware index.

rt-if rt-if-string

Filter by the router interface.

hw-flags invalid-vlan|invalid-port

Filter by hardware flags.

mc-index mc-index-number

L2 multicast group index in hardware.

Version 2.2

Command introduced.

Version 2.2.6

The parameters stp-edge-port|LACP-wait| adjacency-wait|adjacency-check|vlag-wait|multicast-router added.

Version 2.3

The parameters num-ips, and vm-status added.

Version 2.3.1

The parameters caller, last-call, reason, last-reason, and changes added.

Version 2.4

The options, l3-modify, l3-save, and l3-delete added to log-type. The parameters peer-intf, peer-state, and peer-owner-state added.

Version 2.4.1

The parameters vnet and public-vlan added. The options, retire|break-loop|break-loop-timeout added to the parameter reason. The options vxlan-loopback|router added to the parameter, state. The parameters hw-index, rt-if, and hw-flags added.

Version 2.6.2

The parameter svc-name, power, entity, portgroup, pg-vlans, vswitch, vs-type, and vnic-type added.

The parameters hypervisor, vm-id, vm-name, vm-flavor, vm-status, memory, deprecated.

Version 3.1.0

The parameters vtep-ip, and ND added.