vrouter-bfd-neighbor-show
Bidirectional Forwarding Detection (BFD) provides fast BFD peer failure detection times independently of all media types, encapsulations, topologies, and routing protocols BGP, EIGRP, IS-IS, and OSPF. By sending rapid failure detection notices to the routing protocols in the local router to initiate the routing table recalculation process, BFD contributes to greatly reduced overall network convergence time.
Syntax vrouter-bfd-neighbor-show
|
vrouter-name name-string |
Name for the vRouter service. |
|
Specify the following BFD arguments: |
|
|
out-addr ip-address |
The outgoing IP address. |
|
neighbor ip-address |
The neighbor IP address. |
|
local-discr local-discr-number |
The local discriminator. |
|
remote-discr remote-discr-number |
The remote discriminator. |
|
holdown holdown-number(ms) |
The detection time if the BFD session is established. |
|
multiplier multiplier-number |
The detection time multiplier. |
|
state unknown|admin-down|down|init|upno-session|not-replicator-vtep |
The state of the BFD session. |
|
interface interface-string |
The interface of the connection. |
|
flap-count flap-count-number |
The flap count on the router. |
|
remote-router remote-router-string |
The remote router name derived from the IP address. |
|
tx-int tx-int-number |
The minimum transmit interval in milliseconds. |
|
rx-int rx-int-number |
The minimum receive interval in milliseconds. |
Defaults None.
Access CLI
History
|
Version 2.2.6 |
Command introduced. |
|
Version 2.4.1 |
The parameters flap-count and remote-router added. |
Usage Displays information about Bidirectional Forwarding Direction neighbors.
Examples To display information about BFD, use the following command:
CLI (network-admin@switch) > vrouter-bfd-neighbor-show