vrouter-loopback-interface-show
This command displays information about a loopback address added to a virtual router (vRouter) service for a fabric, cluster, virtual network (vNET), or standalone switch.
Syntax vrouter-loopback-interface-show
|
vrouter-name name-string |
Name of the vRouter. |
|
Specify the following loopback interface arguments: |
|
|
index number |
The interface index from 1 to 255. |
|
ip ip-address |
The network IP address. |
|
router-if vrouter-hw-if name |
The internal loopback IP bound to this router interface. |
Defaults None.
Access CLI.
History
|
Version 2.2 |
Command introduced. |
Usage Each fabric, cluster, standalone switch, or virtual network (vNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks, and implements Layer 3 protocols. This command adds a loopback address for an existing vRouter service.
Examples To add the loopback interface of 192.168.11.13 to vRouter, MyvService, , use the following command:
CLI (network-admin@switch) > vrouter-loopback-interface-show
vrouter-name index ip router-if
------------------------- ----- -------------------- ---------
hmplabpsq-we60100-vrouter 1 104.255.61.1 eth0.4092
hmplabpsq-we60100-vrouter 2 2620:0:167f:b000::10 eth0.4092
hmplabpsq-we60200-vrouter 1 104.255.61.2
hmplabpsq-we60200-vrouter 2 2620:0:167f:b000::11
hmplabpsq-we50100-vrouter 1 104.255.61.5
hmplabpsq-we50100-vrouter 2 2620:0:167f:b000::14
hmplabpsq-we50200-vrouter 1 104.255.61.6
hmplabpsq-we50200-vrouter 2 2620:0:167f:b000::15
hmplabpsq-we50300-vrouter 1 104.255.61.7
hmplabpsq-we50300-vrouter 2 2620:0:167f:b000::16
hmplabpsq-we50400-vrouter 1 104.255.61.8
hmplabpsq-we50400-vrouter 2 2620:0:167f:b000::17
hmplabpsq-we50500-vrouter 1 104.255.61.9
hmplabpsq-we50500-vrouter 2 2620:0:167f:b000::18
hmplabpsq-we50600-vrouter 1 104.255.61.10
hmplabpsq-we50600-vrouter 2 2620:0:167f:b000::19