vrouter-mrib-routes-show
This command is used to display multicast routes in Routing Information Base (RIB).
Syntax vrouter-mrib-routes-show
|
type <*,G>|<*,G,V> |
The RIB route type. |
|
srcip ip-address |
The source IP address. |
|
group ip-address |
The group IP address. |
|
vlan 0..4095 |
The VLAN ID. |
|
vrid vrid-number |
The virtual router ID. |
|
hw-group-id hw-group-id-number |
The hardware group ID. |
|
vnic vnic-string |
The VNIC name. |
|
vnic-vlan vnic-vlan-number |
The VLAN assigned to the VNIC. |
|
ports port-list |
The port list. |
|
flags in-hw |
The hardware flags for the route. |
Defaults None
Access CLI
History
Usage Use this command to display information about multicast routes in the Routing Information Base (RIB).
Examples To display multicast routes in the RIB, use the following syntax:
CLI (network-admin@switch) > vrouter-mrib-routes-show
switch type srcip group vlan vrid hw-group-id vnic vnic-vlan ports flags
------ ------- ------------- ---------- ---- ---- ----------- -------- --------- --------------------- -----
switch <S,G,V> 10.16.100.210 232.1.1.20 100 0 0x2000002 eth2.100 100 1,20-23,40-41,128-130
switch <S,G,V> 10.16.100.210 232.1.1.20 100 0 0x2000002 eth2.101 101 20-21,129
switch <S,G,V> 10.16.100.210 232.1.1.20 100 0 0x2000002 eth0.100 100 1,10-13,40-41,128-130
switch <S,G,V> 10.16.100.210 232.1.1.20 100 0 0x2000002 eth0.100 100 1,10-13,40-41,128-130