vrouter-ospf-neighbor-show
This command is used to display OSPF neighbors for a vRouter configured for OSPF.
Syntax vrouter-ospf-neighbor-show
|
vrouter-name name-string |
Name of the vRouter. |
|
neighbor ip-address |
The IP address of the OSPF neighbor |
|
pri pri-number |
The OSPF priority number. |
|
state state-string |
The current state of the OSPF neighbor. |
|
dead-time dead-time |
The dead-time. Dead-time is the interval of time that the vRouter waits before declaring a neighbor is down. |
|
address ip-address |
The IP address of the vRouter. |
|
interface interface-string |
The interface on the vRouter. |
|
vlan vlan-id |
The VLAN ID. This value is between 0, and 4095. |
|
l3-port l3-port-number |
The Layer 3 port number. |
|
vrf vrouter vrf vrf|default |
Name of the VRF router. |
Defaults None.
Access CLI
History
|
Version 1.2.1 |
Command introduced. |
Usage Each fabric, cluster, standalone switch, or virtual network (vNET) can provide its tenants with a virtual router (vRouter) service that forwards traffic between networks, and implements Layer 3 protocols. This command displays OSPF information for an existing Router service.
Examples To display information about all OSPF neighbors on the network, use the following command:
CLI (network-admin@switch) > vrouter-ospf-neighbor-show layout vertical