vtep-auto-vlan-modify
You use this command to automatically assign VLANs to a VTEP.
Syntax vtep-auto-vlan-modify
|
vlans 0..4095 |
Specifies the starting VLAN ID. |
|
vlan-end 0..4095 |
Specifies the ending VLAN ID. |
Defaults None
Access Network Administrator
History
|
Version 3.1.0 |
Command introduced. |
Usage Use the command to automatically assign VLANs to VTEP.
Examples To automatically assign VLANs 10 to 20 to VTEPs, use the following syntax:
CLI (network-admin@switch) > vtep-auto-vlan-modify vlans 10 vlan-end 20