System Log Messages
Version 7.0.2-7000219597
Identifier |
Message |
Code |
Description |
Severity |
system_drop |
lost [drops]d [msgs]s |
10002 |
Unable to deliver system log(s) to nvlogd so system logs dropped. |
Warn |
update_find_server_failed |
Failed to contact update server. |
11006 |
Failed to find update server. |
Warn |
update_wrong_redirect |
Unexpected redirect url(s) from update server. |
11007 |
Got an unexpected redirect from HTTP update server lookup. |
Warn |
nvOSd_start |
nvOSd start: version=version(s) changeset=changeset(s) branch=branch(s) |
11008 |
nvOSd startup |
Note |
pkt_alloc_failed |
feature(s) failed to allocate a send buffer. |
11009 |
Failed to allocate a packet for sending from the CPU |
Warn |
syscall_failed_Critical |
feature(s): syscall(s) failed: [error]m |
11012 |
A system call failed. |
Critical |
resstart_nvOSd |
Restarting exe(s) |
11013 |
Restarting nvOSd. |
Note |
restart_nvOSd_failed |
Failed to restart exe(s): [error]m |
11014 |
Failed to restart nvOSd |
Critical |
nvOSd_init_failed |
nvOSd failed to start: feature(s): [error]m |
11015 |
nvOSd was unable to start. |
Critical |
loop_detected |
LOOP: mac [mac]M [net]N on switch [old_switch]n port [old_port]d ([old_ip]I), also on switch [new_switch]n port [new_port]d ([new_ip]I) [caller]s |
11016 |
Detected an L2 loop. |
Note |
mac_moved |
MOVING MAC=[mac]M, vnet=[vnet]s vlan [vlan]d from switch [old_switch]n [old_port]d ([old_ip]I) to switch [new_switch]n [new_port]d [new_ip]I [caller]s |
11017 |
MAC moved from one port to another. |
Note |
simulator_mode |
Failed to init switch hardware. |
11018 |
Simulator mode entered but not from command line. |
Critical |
fabric_joined |
Joined fabric [fabname]s |
11019 |
Switch joined a fabric. |
Note |
fabric_unjoined |
Unjoined fabric [fabname]s |
11020 |
Switch un-joined the fabric. |
Note |
config_imported |
Imported configuration from [file]s |
11021 |
Imported a new configuration. |
Note |
stp_switch_enable_failed |
STP failed to initialize for switch hardware. |
11028 |
STP initialization for underlying hardware switch failed. |
Critical |
stp_default_spanning_tree_failed |
STP Failed to Create Default Spanning Tree: vlan=[vlan]d |
11029 |
Unable to create the Spanning Tree for default VLAN. |
Critical |
stp_flow |
STP Failed to install flow(s) for BPDU reception: [flow]s |
11030 |
Unable to install STP flow(s) for the reception of STP packets. |
Critical |
stp_worker_thread_failed |
STP failed to create worker thread: vlan=[vlan]d |
11031 |
STP was unable to create worker thread for Spanning Tree. |
Critical |
stp_config_failed |
Loading and application STP configuration failed. |
11041 |
The loading and application of STP configuration failed. |
Warn |
stp_switch_port_state |
STP Port State Failure: port=[port]d vlan=[vlan]d |
11045 |
Unable to set the port state for the port on the VLAN. |
Critical |
stp_trunk_port_state |
STP Set Port State: port=[port]d vlan=[vlan]d trunk=[trunk]d |
11046 |
Invalid trunk in use by the spanning tree |
Warn |
mcast_switch_init |
igmp/mld snooping unable to initialize switch hardware for groups |
11047 |
IGMP/MLD was unable to initialize switch hardware for the group. |
Critical |
igmp_flow_add |
IGMP snooping unable to add flow: flow=[flow]s |
11048 |
IGMP was unable to add a flow for IGMP packet processing. |
Warn |
igmp_flow_remove |
IGMP snooping not able to remove flow: flow=[flow]s |
11049 |
IGMP snooping unable to remove flow for IGMP processing. |
Warn |
igmp_query_start |
IGMP was not able to start query state machine. |
11050 |
IGMP snooping unable to start query state machine. |
Warn |
igmp_query_stop |
IGMP was not unable to stop query state machine. |
11051 |
IGMP snooping unable to stop query state machine. |
Warn |
mcast_switch_fini |
IGMP/mld snooping unable to halt switch hardware for groups. |
11052 |
IGMP/MLD snooping unable to halt switch hardware for groups. |
Warn |
igmp_static_load |
IGMP snooping unable to load static IGMP group. |
11053 |
IGMP snooping unable to load static IGMP group. |
Warn |
igmp_static_source_load |
IGMP snooping unable to load static IGMP source list. |
11054 |
IGMP snooping unable to load static IGMP source list. |
Warn |
igmp_flooding |
IGMP flooding not enabled. |
11055 |
IGMP flooding not enabled. |
Warn |
mcast_group_add_failed |
IGMP/MLD Group Add Failed: vlan=[vlan]d group=[group]s |
11071 |
mcast snooping failed to add a group to switch hardware |
Warn |
mcast_group_remove_failed |
IGMP/MLD Group Remove Failed: vlan=[vlan]d group=[group]s |
11072 |
mcast snooping failed to remove a group from switch hardware |
Warn |
software_upgrade_initiated |
nvOS software upgrade initiated for [verinfo]s |
11073 |
Software upgrade initiated; downloading and installing new packages. |
Note |
software_upgrade_complete |
System and nvOS software upgrade complete: [verinfo]s |
11074 |
System and nvOS software upgrade complete. |
Note |
software_upgrade_failed |
nvOS software upgrade failed: [err]s |
11075 |
software upgrade failed. |
Warn |
system_reboot |
System reboot initiated by nvOSd |
11076 |
System reboot initiated by nvOSd. |
Note |
system_reboot_failed |
System reboot initiated by nvOSd failed. |
11077 |
System reboot initiated by nvOSd failed. |
Warn |
lldp_agent_create_thread_failed |
LLDP Agent Thread Create Failed: mac=[mac]s group=[group]s error=[error]d |
11079 |
Creation of threads for LLDP Agent failed. |
Warn |
lldp_flow_add_failed |
LLDP Flow Add Failed: flow=[flow]s |
11080 |
Adding flow for LLDP packet reception failed. |
Warn |
lldp_flow_remove_failed |
LLDP Flow Remove Failed: flow=[flow]s |
11081 |
Removing flow for LLDP packet reception failed. |
Warn |
evb_platform_not_supported |
EVB is not supported on this platform: port=[port]d |
11089 |
EVB is not supported on this platform. |
Warn |
evb_ecp_not_enabled |
EVB ECP is Not Enabled: port |
11090 |
Received EVB TLV with ECP not enabled. |
Warn |
evb_flow_remove_failed |
EVB Flow Remove Failed: flowstr=[flowstr]s |
11095 |
Unable to remove specified EVB flow. |
Warn |
lldp_agent_create_failure |
LLDP Agent Create Failed: agent=[agent]s |
11111 |
Failed to create LLDP agent for one of three agent addresses. |
Warn |
stats_log_open_failed |
file=[file]s: stats log file open failed |
11140 |
Log file open failed |
Warn |
container_rebuild_start |
container=[container]s rebuild is started |
11141 |
Container rebuild is started |
Note |
container_rebuild_end |
container=[container]s rebuild is completed |
11142 |
Container rebuild is completed |
Note |
all_container_rebuild |
all containers are rebuilt |
11143 |
All containers are rebuilt |
Warn |
loop_broken |
LOOP Broken: port=[port]d vlan=[vlan]d mac=[mac]s ip=[ip]s |
11180 |
A loop was broken on a port or VLAN for a MAC or IP address |
Warn |
loop_stp |
LOOP STP: port=[port]d vlan=[vlan]d mac=[mac]s ip=[ip]s |
11181 |
A loop was detected that STP should have prevented. |
Warn |
update_auto_upgrade |
PN Cloud initiated software upgrade |
11210 |
The update server initiated an upgrade for nvOS. |
Note |
update_error |
Error message from PN Clould: [msg]s |
11211 |
The update server sent an error message. |
Warn |
ps_initial_status |
Power supply [psu]d initial status [status]s |
11302 |
Power supply initial status |
Warn |
fan_initial_status |
Fan [fan]d initial status [status]s |
11303 |
Fan initial status. |
Warn |
ps_status_change |
Power supply [psu]d changed from [init_status]s to [new_status]s |
11304 |
Power supply state change. |
Warn |
fan_status_change |
Fan [fan]d changed from [init_status]s to [new_status]s |
11305 |
Fan status change |
Warn |
fabric_node_duplicate_ip |
Fabric node has the same ip=[ip]I as the local node, cannot send to it |
11319 |
Fabric node has the same IP as the local node, cannot send to it. |
Warn |
upgrade_error |
software upgrade error: [name]s: [func]s - [err]s |
11324 |
Software Upgrade errors |
Warn |
upgrade_informational |
software upgrade Note: [name]s: [func]s - [info]s |
11325 |
Software Upgrade informational messages |
Note |
upgrade_reboot |
System reboot initiated by upgrade agent |
11326 |
System reboot initiated by software upgrade |
Note |
upgrade_reboot_failed |
System reboot initiated by upgrade agent failed |
11327 |
System reboot initiated by software upgrade failed |
Warn |
openstack_nat_failed |
Failed to setup NAT on the OpenStack controller [name]s |
11328 |
Failed to configure NAT for OpenStack |
Warn |
mac_tunnel_to_port |
MOVING MAC=[mac]M, vnet=[vnet]s vlan=[vlan]d from tunnel=[tunnel]s ip=[old_ip]I to port=[port]d ip=[new_ip]I [caller]s |
11329 |
MAC moved from a tunnel to a port |
Warn |
mac_port_to_switch |
MOVING MAC=[mac]M, vlan=[vlan]d from switch=[old_sw]s port=[old_port]d ip=[old_ip]I to switch=[new_sw]s port=[new_port]d ip=[new_ip]I [caller]s |
11330 |
MAC moved from a port to another switch |
Note |
mld_flow_add |
mld snooping unable to add flow: flow=[flow]s |
11341 |
MLD was unable to add a flow for MLD packet processing |
Warn |
mld_flow_remove |
mld snooping not able to remove flow: flow=[flow]s |
11342 |
MLD snooping unable to remove flow for MLD processing |
Warn |
mld_query_start |
mld snooping unable to start query state machine |
11343 |
MLD snooping was not able to start query state machine. |
Warn |
mld_query_stop |
mld snooping unable to stop query state machine |
11344 |
MLD was not able to stop the query state machine. |
Warn |
mld_static_load |
mld snooping unable to load static mld group |
11345 |
MLD snooping unable to load static MLD group. |
Warn |
mld_static_source_load |
mld snooping unable to load static mld group source list |
11346 |
MLD snooping unable to load static MLD group source list. |
Warn |
xact_node_ignored |
Ignoring offline or out of sync cluster node name=[name]s for transaction tid=[tid]d |
11366 |
Ignored offline or out of sync cluster node for transaction |
Warn |
xact_recover |
Transactions out-of-sync detected, rolled forward from old=[old]d to new=[new]d via node=[node]s |
11367 |
Auto-recovered from transactions being out of sync. |
Warn |
xact_recover_failed |
Transaction auto-recover failed: [msg]s |
11368 |
Auto-recover attempted but failed |
Warn |
ip_moved |
Moving ip=[ip]I from old-mac=[old_mac]M to new-mac=[new_mac]M |
11369 |
IP address moved from one MAC to another MAC |
Note |
software_license_expiring |
software license(s) expiring soon code=[code]s expires_on=[expires_on]s |
11370 |
Software license(s) expiring |
Warn |
software_license_expired |
software license(s) have expired code=[code]s expired_on=[expires_on]s |
11371 |
Software license(s) have expired |
Warn |
l2_check_missing |
Add missing l2 entry to hardware: mac=[mac]M [net]N vxlan=[vxlan]d port=[port]d tunnel=[tunnel_name]s result=[result]s |
11376 |
Add layer 2 entry that was missing in hardware |
Warn |
l2_check_bad_port |
Fix l2 entry in hardware with incorrect port: mac=[mac]M [net]N vxlan=[vxlan]d old_port=[old_port]d new_port=[new_port]d result=[result]s |
11377 |
Fix layer 2 entry in hardware with incorrect port |
Warn |
l2_check_orphaned |
Remove orphaned l2 entry from hardware: mac=[mac]M [net]N vxlan=[vxlan]d port=[port]d tunnel=[tunnel]s result=[result]s |
11378 |
Remove orphaned layer 2 entry in hardware (not in software table) |
Warn |
mac_move_denied |
MOVE DENIED mac=[mac]M [net]N from switch=[sw]n port=[port]d to deny-switch=[deny_sw]n deny-port=[deny_port]d reason=[reason]s |
11379 |
MAC moved not allowed |
Note |
host_port_loop_detected |
Looping traffic detected on switch=[sw]n local-host-port=[port]d [net]N. Traffic on this port/network will be ignored until loop resolved |
11380 |
Loop detected on host port |
Warn |
host_port_loop_resolved |
Traffic has stopped looping on host-port=[port]d [net]N |
11381 |
Loop on host port is no longer happening |
Note |
owner_mac_moved |
caller=[caller]s owner=[owner]n mac=[mac]M vnet=[vnet]s vlan=[vlan]d moved from old-local-port=[old_port]d to new-local-port=[new_port]d |
11382 |
Other switch's MAC moved from one local port to another |
Note |
mstp_set_port_state_failed |
STP Port State Failure: port=[port]d instance=[instance]d |
11384 |
Unable to set the STP state for the port on the MST instance |
Critical |
mac_port_to_tunnel |
MOVING MAC=[mac]M, vnet=[vnet]s vlan=[vlan]d from port=[port]d ip=[old_ip]I to tunnel=[tunnel]s ip=[new_ip]I [caller]s |
11385 |
MAC moved from a port to a tunnel |
Note |
cluster_vlag_l2_update_failed |
Updating mac=[mac]M vnet=[vnet]s vlan=[vlan]d from peer update to vlag port port=[port]d failed, cluster may be out-of-sync: reason=[reason] |
11386 |
Updating mac to vlag port in response to peer status update failed, cluster L2 may be out of sync |
Warn |
cluster_tunnel_l2_update_failed |
Updating mac=[mac]M vxlan=[vxlan]d tunnel=[tunnel]s from peer update failed, cluster may be out-of-sync: reason=[reason]s |
11387 |
Updating tunnel mac in response to peer status update failed, cluster L2 may be out of sync |
Warn |
cluster_comm_l2_update_failed |
Updating mac=[mac]M vnet=[vnet]s vlan=[vlan]d from peer update to cluster port port=[port]d failed, cluster may be out-of-sync: reason=[reason]s |
11388 |
Updating mac to cluster link in response to peer status update failed, cluster L2 may be out of sync |
Warn |
l2_check_bad_tunnel |
Fix l2 entry in hardware with incorrect tunnel: mac=[mac]M [net]N vxlan=[vxlan]d old_tunnel=[old_tunnel]s new_tunnel=[new_tunnel]s result=[result]s |
11389 |
Fix layer 2 entry in hardware with incorrect tunnel |
Note |
l2_check_mismatch_vport |
Mismatched vport entry: mac=[mac]M [net]N vxlan=[vxlan]d hw_vlan=[hw_vlan]d hw_vxlan=[hw_vxlan]d result=[result]s |
11390 |
Mismatched vport entry |
Note |
l2_check_mark_port_mac |
Marked vport as port-mac: mac=[mac]M [net]N vxlan=[vxlan]d |
11391 |
Marked owned local vport as port-mac |
Warn |
l2_check_delete_port_mac |
Delete invalid port-mac vport: mac=[mac]M [net]N vxlan=[vxlan]d |
11392 |
Delete port-mac that should not be in vport table |
Warn |
hostid_collision_detected |
Our hostid is being used by another node [node_name]s |
11393 |
Received keep-alive from another node having same hostid |
Critical |
mirror_to_cpu_configured |
Mirror to CPU configured on vFlow [vflow_name]s |
11395 |
Mirror to CPU configured |
Note |
low_disk_space |
Disk Space Usage has exceeded threshold of 70 percent |
11396 |
Disk space usage exceeds 70 percent |
Warn |
stp_vnet_port_recv |
received STP BPDU on vnet port: port=[port]d |
11397 |
Received an STP BPDU on a vnet port |
Warn |
igmp_disabled |
Disabling IGMP on network: [net]N |
11398 |
Disabling IGMP on network |
Note |
igmp_enabled |
Enabling IGMP on network: [net]N |
11399 |
Enabling IGMP on network |
Note |
l2_check_hw_invalid |
Remove invalid l2 entry from hardware: mac=[mac]M [net]N vxlan=[vxlan]d port=[port]d tunnel=[tunnel]s result=[result]s |
11400 |
Remove invalid layer 2 entry in hardware (incorrect HW entry) |
Warn |
congestion_on_port |
Congestion detected on port=[port]d |
11401 |
Congestion detected on port. Positive icongdrop/ocongdrop |
Critical |
congestion_relieved_on_port |
Congestion relieved on port=[port]d |
11402 |
Congestion relieved on port. |
Critical |
fabric_node_status |
[node_name]s: Node status changed to [status]s |
11403 |
Fabric node state change |
Note |
mld_disabled |
Disabling MLD on vlan: vlan=[vlan]d |
11404 |
Disabling MLD on vlan |
Note |
mld_enabled |
Enabling MLD on vlan: vlan=[vlan]d |
11405 |
Enabling MLD on vlan |
Note |
vlan_public_id_mismatch |
vnet=[vnet]s vlan=[vlan]d public-id mismatch while cluster offline |
11406 |
While cluster was offline vlan public-id mismatch happened |
Error |
vlan_port_node_ignored |
Ignoring offline cluster node name=[name]s while assigning public vlan to vnet=[vnet]s vlan=[vlan]d |
11407 |
Ignored offline cluster for private vlan port assignment |
Warn |
vlan_public_id_fail |
failed to set public-vlan for vnet=[vnet]s vlan=[vlan]d msg=[msg]s |
11408 |
Failed to set public vlan id while handling cluster status update |
Error |
bad_xcvr_detected |
unable to access I2C bus; possible bad transceiver |
11409 |
Unable to access I2C bus; possibly a bad transceiver is inserted |
Error |
tacacs_server_error |
server=[server]s TACACS+ authorization disabled due to repeated server errors |
11414 |
Repeated TACACS+ server errors. TACACS+ authorization disabled |
Critical |
tacacs_server_ok |
server=[server]s TACACS+ authorization enabled due to server errors resolved |
11415 |
TACACS+ server has recovered from errors. TACACS+ Authorization enabled. |
Note |
dhcp_untrusted_msg |
DHCP server message received from untrusted port=[port]d server-ip=[ip]I |
11416 |
Received DHCP server message from an untrusted port. |
Warn |
fabric_guard_loop_detect |
Fabric-guard detected a loop on port [port]d. Port blocked. |
11422 |
Fabric-guard detected loop |
Note |
replace_offline_node |
loc-id=[loc_id]d: node=[name]s node-id=[node_id]d replacing old-node=[old_name]s old-node-id=[old_node_id]d |
11423 |
New node replacing offline node with the same location id. |
Note |
loc_id_conflict |
loc-id=[loc_id]d owned by node=[name]s node-id=[node_id]d, ignore message from conflict-node=[old_name]s conflict-node-id=[old_node_id]d |
11424 |
Two nodes with the same loc-id is not allowed, ignoring latest |
Warn |
ntp_server_sync |
NTP server is unresolvable/unreachable |
11431 |
NTP server not resolvable/reachable |
Critical |
xact_rollforward_ignore_error |
Transactions rollforward tid=[tid]d cmd=[cmd]s failed result=[result]R, ignoring error |
11432 |
xact rollforward failure overridden by user |
Warn |
xact_rollback_ignore_error |
Transactions rollback tid=[tid]d cmd=[cmd]s failed result=[result]R, ignoring error |
11433 |
xact rollback failure overridden by user |
Warn |
nxu_module_fw_upgrade |
Installed version: [inst]s; available version [avail]s |
11434 |
One or more Lutera xcvrs require module firmware upgrade |
Warn |
nxu_chipset_fw_upgrade |
Installed version: [inst]s; available version [avail]s |
11435 |
One or more Lutera xcvrs require chipset firmware upgrade |
Warn |
sensor_unavailable |
sensor [name]s cannot be accessed |
11436 |
Sensor cannot be read by BMC |
Warn |
ipv6_raguard_ra_port_drop |
Dropping RA from port=[port]d. [msg]s |
11504 |
Drop RA packet from port according to RA Guard Policy |
Warn |
ipv6_raguard_ra_port_drop |
Dropping RA from vlan=[vlan]d. [msg]s |
11505 |
Drop RA packet from vlan according to RA Guard Policy |
Warn |
disk_health_below_RMA |
The disk health level [current]d is significantly below recommended level [rma]d, please notify Pluribus TAC immediately |
11514 |
The disk health is below the minimum required to work needs to be RMAed |
Critical |
disk_health_below_minimum |
The disk health level [current]d is below recommended level [rma]d, please notify Pluribus TAC |
11515 |
The disk health is below the minimum required to work |
Critical |
disk_health_filesystem_readonly |
The filesystem [part]s is in Read Only mode, please notify Pluribus TAC immediately |
11516 |
The disk partition is mounted read-only |
Critical |
low_disk_space_ninety |
Disk Space Usage has exceeded threshold of 90 percent |
11517 |
Disk space usage exceeds 90 percent |
Warn |
normal_space |
Disk Space Usage is normal below 70 percent |
11518 |
Disk space usage is normal |
Warn |
SI_setting_update |
Changed SI setting for port(s) [pmap]s to [cbl_type]s |
11519 |
User has set explicit port cable type |
Warn |
unsupported_platform |
Support for this hardware was deprecated starting with nvOS [eos]s and later.Please review the Release Notes for this and previous releases to find the list of supported hardware, and revert back to an earlier supported release |
11520 |
Not supported |
Warn |
fabric_password_update |
[node_name]s: [msg]s |
11522 |
Password reset or changed |
Note |
excess_mac_move |
Excess MAC moves detected for mac=[mac]M, vnet=[vnet]s vlan=[vlan]d vxlan=[vxlan]d |
11523 |
Excess MAC moves detected |
Note |
excess_ip_move |
Excess IP moves detected for ip=[ip]I vnet=[vnet]s vlan=[vlan]d vxlan=[vxlan]d |
11524 |
Excess IP moves detected |
Note |
clear_excess_mac_move |
Excess MAC move condition cleared for mac=[mac]M, vnet=[vnet]s vlan=[vlan]d vxlan=[vxlan]d |
11525 |
Excess MAC move condition cleared |
Note |
clear_excess_ip_move |
Excess IP move condition cleared for ip=[ip]I vnet=[vnet]s vlan=[vlan]d vxlan=[vxlan]d |
11526 |
Excess IP move condition cleared |
Note |
port_oir_error_enter |
Port=[port]d enter xcvr oir error state |
11527 |
Port enter xcvr oir error state |
Warn |
port_oir_error_exit |
Port=[port]d exit xcvr oir error state |
11528 |
Port exit xcvr oir error state |
Warn |
maintenance_enabled |
System is in Maintenance mode |
11529 |
System state is maintenance-enabled |
Warn |
maintenance_disabled |
System is in Operational mode |
11530 |
System state is operational (maintenance-disabled) |
Note |
current_date_and_time |
Current date and time: [timestr]s |
11539 |
Log the previous date and time and origin |
Info |
new_date_and_time |
New date and time: [timestr]s |
11540 |
Log the new date and time and origin |
Info |
rx_port_bw_th_exceed |
Ingress threshold at port exceeded port bw threshold |
11549 |
Ingress threshold at port exceeded port bw threshold |
Warn |
rx_port_bw_th_not_exceed |
Ingress port bandwidth threshold no longer exceeding at port=[port]d |
11550 |
Ingress threshold at port not exceeding port bw threshold |
Warn |
tx_port_bw_th_exceed |
Egress port bandwidth threshold exceeded at port=[port]d |
11551 |
Egress threshold at port exceeded port bw threshold |
Warn |
tx_port_bw_th_not_exceed |
Egress port bandwidth threshold no longer exceeding at port=[port]d |
11552 |
Egress threshold at port not exceeding port bw threshold |
Warn |
uplink_oversubscription |
uplink group oversubscription due to [trigger]s. |
11553 |
Uplink oversubscription is observed. |
Warn |
syslog_send_failed |
Failed to send log message to syslog: server=[server]s \"err=[err]m\" |
20000 |
sendto failed. This probably means some sort of resource exhaustion because it's a udp socket we're sending on |
Error |
syslog_hostname_lookup_failed |
Failed to resolve hostname=[host]s for syslog server=[server]s err=\"[err]m\" |
20001 |
Switch may have DNS problems, or admin has configured a bogus hostname for syslog server |
Error |
system_repeats |
Last [msgs]d message(s) repeated [times]d time(s) |
20002 |
Compress repeated messages |
Note |
reset_counters |
system log counters reset timestamp [timestamp]s |
20005 |
Reset system log counters. |
Note |
syslog_tls_server_down |
tcp-tls connection to syslog server=[server]s down. Logs are not getting exported |
20006 |
Connection to syslog export TCP/TLS server is down. syslog export to external server is not happening. |
Error |
syslog_tls_server_restored |
tcp-tls connection to syslog server=[server]s restored. Log export is operational |
20007 |
Connection to syslog export TCP/TLS server is restored. |
Note |
syslog_tls_server_dropped |
syslog export log messages to syslog server=[server]s getting dropped |
20008 |
Syslog export message(s) to TCP/TLS server dropped. |
Error |
syslog_tls_server_delayed |
syslog export log messages to syslog server=[server]s getting delayed |
20009 |
Syslog export message(s) to TCP/TLS server delayed. |
Error |
generic_platform_audit |
platform audit message: [msg]s |
20010 |
Platform audit message |
Note |
container_log |
container log message: [msg]s |
20011 |
Logs from the containers |
Note |
os_logs |
OS audit log message: [msg]s |
20012 |
Logs from the Operating system auditing |
Note |
mon_start |
=== nvOS_mon start === |
30000 |
nvOS_mon startup |
Note |
mon_exit |
Exiting because reason(s) |
30001 |
Monitor exiting for some reason. |
Warn |
mon_reboot |
system reboot |
30004 |
nvOS_mon is rebooting the system |
Note |
mon_restart_nvOSd |
Monitor restarting nvOSd |
30005 |
Restarting nvOSd |
Note |
mon_failure_detected |
Monitor detected failure [failure]s |
30006 |
Monitor detected a failure. |
Warn |
mon_reset |
Reset nvOSd config |
30007 |
nvOS_mon is resetting nvOSd's configuration. |
Note |
mon_grub_gen |
Regenerating grub configuration for new boot environment. |
30008 |
nvOS_mon is regenerating grub. |
Note |
mon_restart_tomcat |
Monitor restarting tomcat. |
30009 |
Restarting tomcat. |
Note |
mon_cpu_usage_high |
High cpu usage detected. |
30010 |
High CPU usage detected. |
Note |
mon_memory_usage_high |
High memory usage detected |
30011 |
high memory usage detected. |
Note |
mon_disable_ports |
nvOSd cannot be revived; disabling ports to prevent headless switching. |
30012 |
Monitor failed to restart nvOSd; disabling ports to prevent headless switching. |
Critical |
mon_auth_failed |
User authorization failed for user [name]s, pid [pid]d, ip [ip]I |
30013 |
User authorization failed. |
Note |
mon_keepalive_hung |
nvOS_mon is possibly stuck ! [action]s |
30014 |
nvOS_mon keepalive_checker thread is possibly hung. |
Critical |
mon_autoreboot_cancel |
[reason]s; the system will not be rebooted. |
30015 |
System will not be rebooted; auto-reboot is disabled or software-upgrade is in progress. |
Critical |
mon_autoreboot_failed |
System failed to auto-reboot: [reason]s |
30016 |
auto-reboot failed |
Critical |
mon_cpu_usage_higher_than_seventy |
CPU usage higher than 70 percent detected |
30017 |
CPU usage higher than 70 percent detected |
Warn |
mon_memory_usage_higher_than_seventy |
Memory usage higher than 70 percent detected |
30018 |
Memory usage higher than 70 percent detected |
Warn |
mon_memory_usage_lower_than_sixtyfive |
Memory usage is normal, lower than 65([mem].2f) percent detected |
30019 |
Memory usage is normal, lower than 65 (%[mem].2f) percent detected |
Note |
mon_memory_usage_higher_than_eighty |
Memory usage higher than 80 percent detected |
30020 |
Memory usage higher than 80 percent detected |
Warn |
mon_memory_usage_higher_than_ninety |
Memory usage higher than 90 percent detected |
30021 |
Memory usage higher than 90 percent detected |
Warn |
fanmon_fan_status |
Controller [controller]d fan [fan]d speed [rpm]d RPM |
31000 |
Initial status of a fan |
Note |
fanmon_fan_missing |
Controller [controller]d fan [fan]d is missing |
31001 |
Fan is missing |
Warn |
fanmon_fan_status_max |
Controller [controller]d fan [fan]d speed is max |
31002 |
Fan is set to maximum speed. |
Note |
fanmon_fan_fault |
Controller [controller]d fan [fan]d fault: [fault]s |
31003 |
Fan fault detected |
Warn |
fanmon_fan_fault_compensate |
One fan failed; setting all other fans to max speed |
31004 |
One fan faulted, so setting all other fans to max speed to compensate |
Warn |
fanmon_poweroff |
Fan monitor powering down system: [reason]s |
31005 |
Fan monitor powering down system due to faults or overtemp |
Critical |
smf_nvOSd_start |
SMF Service starting nvOSd |
31007 |
SMF starting nvOSd |
Note |
smf_nvOSd_stop |
SMF Service stopping nvOSd |
31008 |
SMF stopping nvOSd |
Note |
hw_route_prec0_detected |
F64 count=[count]d hardware routes with invalid precedence detected |
31011 |
Aquila hardware route with invalid precedence detected |
Critical |
fanmon_fan_info |
Current temp [temp]d Current speed [rpm]d RPM |
31015 |
Show current temperature and Fan Speed setting info |
Note |
hwmon_start |
=== nvOSd_hwmon start === |
32000 |
nvOSd_hwmon startup |
Note |
hwmon_exit |
exiting because [reason]s |
32001 |
Hardware monitor exiting for some reason |
Warn |
hwmon_power_supply_fault |
power supply [name]s fault |
32002 |
Power supply has failed |
Critical |
hwmon_power_supply_ok |
power supply [name]s has recovered from faulted state |
32003 |
Power supply OK |
Note |
hwmon_fan_fault |
fan [name]s fault |
32004 |
Fan has failed |
Critical |
hwmon_fan_ok |
fan [name]s has recovered from faulted state |
32005 |
Fan ok |
Note |
hwmon_sensor_fault |
temperature sensor [name]s fault |
32006 |
Temperature sensor fault |
Warn |
hwmon_sensor_ok |
temperature sensor [name]s has recovered from faulted state |
32007 |
Temperature sensor ok |
Note |
hwmon_temp_warning |
[name]s at [t1]dC, shutdown at [t2]dC |
32008 |
High temperature warning |
Warn |
hwmon_temp_Critical |
[name]s at [t1]dC, shutdown at [t2]dC |
32009 |
High temperature Critical |
Critical |
hwmon_temp_shutdown |
shutting down system: [name]s at [t1]dC |
32010 |
High temperature system shutdown |
Critical |
hwmon_shutdown_failed |
system high temperature shutdown failed |
32011 |
High temperature system shutdown failed |
Critical |
hwmon_temp_ok |
[name]s at [t1]dC, temperature ok |
32012 |
Temperature OK |
Note |
hwmon_watt_sensor_fault |
power sensor %[name]s fault |
32013 |
Power sensor has failed |
Critical |
hwmon_watt_sensor_ok |
power sensor %[name]s has recovered from faulted state |
32014 |
Power sensor OK |
Note |