bridge-domain-create

A bridge domain is a set of logical ports that share the same flooding or broadcast characteristics. Use this command to create a bridge domain.

Syntax   bridge-domain-create

name name-string

Specify the name for the bridge domain.

scope local|cluster|fabric

Specify the bridge domain scope.

Specify any of the following options:


vnet vnet name

vNET for this Bridge Domain.

vxlan 0..16777215

Specify the VXLAN identifier for the tunnel.

auto-vxlan|no-auto-vxlan

Specify the options to automatically assign VXLAN, and/or assign to VTEPs.

description description-string        

Add a bridge domain description.

rsvd-vlan 1..4093        

Specify the fabric reserved VLAN for cluster switches for bridge domain.

local-rsvd-vlan 1..4093

Specify the local reserved VLAN for cluster switches for bridge domain.

vxlan-inner-packet auto|remove-tags|transparent

Preserve original Ethernet header inside the VXLAN tunnel.

mac-learning|no-mac-learning        

Specify if you want to enable or disable MAC address learning.

l2-tunneling none|lldp|stp|lacp|all

Enable L2 tunneling on this bridge domain. You can tunnel LLDP, STP, and LACP packets by specifying the corresponding keywords.

Defaults   None

History   

Version 5.2.0

Command introduced.

Version 6.0.0

The parameter mac-learning added.

Version 6.1.1

The parameter l2-tunneling added.

Usage   Use this command to create a bridge domain.

Examples  To create a bridge domain with the name bd100, and cluster scope, use the command:

CLI (network-admin@switch) > bridge-domain-create name bd100 scope cluster

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south