cluster-show
To display a cluster configuration in a fabric, use the cluster-show command.
Syntax cluster-show
|
name name-string |
Name of the cluster. |
|
cluster-id |
The ID assigned to the cluster configuration. |
|
state |
• offline • unavailable • online • coming-online • slave-ready • going offline |
|
cluster-node-1 |
The name of the first fabric node in the cluster. |
|
cluster-node-2 |
The name of the first fabric node in the cluster. |
|
tid tid-number |
The transaction ID number. |
|
mode none|master|slave |
The mode assigned to the cluster. |
|
ports port-list |
The list of ports. |
|
remote-ports port-list |
The list of remote ports. |
|
validate|no-validate |
Validate the inter-switch links, and state of the switches in the cluster. |
|
cluster-sync-timeout milliseconds |
Specify the amount of time before a cluster times out during synchronization. Specify a time between 500, and 2000 ms. |
|
cluster-sync-offline-count number |
Specify the number of missed synchronizations before the cluster goes offline. |
|
enable|disable |
The if you enabled or disabled STP. |
|
stp-mode rstp|mstp |
The STP mode. |
|
bpdus-bridge-ports|bpdus-all-ports |
The if the cluster sends BPDU packets to bridge specific ports. |
|
bridge-id mac-address |
The bridge MAC address. |
|
bridge-priority bridge-priority-number |
The bridge priority with a default value of 32768. |
|
hello-time seconds |
The hello time in seconds |
|
forwarding-delay seconds |
The forwarding time delay in seconds. |
|
max-age seconds |
The maximum aging time in seconds. |
|
mst-max-hops count |
The number of maximum hops for MSTP BPDUs. |
|
mst-config-name mst-config-name-string |
The name of the MST configuration instance. |
|
mst-config-revision mst-config-revision-number |
The MST configuration revision number. |
|
mst-config-digest mst-config-digest-string |
The MST configuration digest. |
|
cluster-mode none|master|slave |
The STP cluster mode. |
|
mst-digest-mismatch-on-ports port-list |
The MST digest mismatch. |
|
mst-digest-mismatch-on-peer-ports port-list |
The MST digest mismatch for cluster peer. |
|
mst-config-id-mismatch-on-ports port-list |
The MST Config ID mismatch. |
|
mst-config-id-mismatch-on-peer-ports port-list |
The MST Config ID mismatch for cluster peer. |
|
mst-revision-mismatch-on-ports port-list |
The MST Revision mismatch. |
|
mst-revision-mismatch-on-peer-ports port-list |
The MST Revision mismatch for cluster peer. |
|
root-guard-wait-time seconds |
The root guard wait time. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.1 |
The parameter private-linkadded. |
|
Version 2.2 |
The parameter private-link, deprecated. |
|
Version 2.4 |
The parameters mode and remote-ports added. The option synching deprecated. The option slave-ready, and going-offline added. |
|
Version 2.4.1 |
The parameters online, and unavailable added. |
|
Version 3.0.0 |
The parameters cluster-sync-timeout and cluster-sync-offline-count added. |
|
Version 6.0.1 |
The parameters mst-config-revision added. |
Usage The information about cluster configurations on the network.
Examples To show information about a cluster configuration, use the following command:
CLI (network-admin@switch) > cluster-show format all layout vertical
name: vlag
id: a000030:1
state: online
cluster-node-1: pubdev01
cluster-node-2: pubdev02
tid: 0
mode: master
remote-port: 33,34
ports: 26,128