connection-latency-show
This command is used to display latency information for connections on the switch. Comparing latency information for connections at various times can show whether the network performance has changed or stayed the same, and potentially eliminate the network as the cause of the problem.
Syntax connection-latency-show
|
min high resolution time: #ns |
The minimum latency in nanoseconds. |
|
max high resolution time: #ns |
The maximum latency in nanoseconds. |
|
num-bins num-bins-number |
Specify the number of bins to divide the latency range. Bins display the number of connections at each latency interval. |
Defaults None
Access CLI
History
|
Version 2.0 |
Command introduced. |
Usage You can display all of the latency information about a connection or you can filter by the number of bins to display. Comparing latency information for connections at various times can show whether the network performance has changed or stayed the same, and potentially eliminate the network as the cause of the problem
Examples To display all latency information on pleiades24, use the following command:
CLI (network-admin@switch) > connection-latency-show
switch min max num-conns percent avg-dur obytes ibytes total-bytes
---------- ------ ------ --------- ------- ------- ------ ------ -----------
pleiades2 40.00ns 20.0us 13 0% 0 0 0
pleiades24 20.0us 40.0us 80 3% 1.28us 146K 305K 451K
pleiades24 40.0us 60.0us 671 28% 14.9us 1.19M 2.50M 3.69M
pleiades24 60.0us 80.0us 649 27% 19.2us 1.16M 2.42M 3.57M
pleiades24 80.0us 100us 337 14% 12.9us 615K 1.25M 1.86M
pleiades24 100us 120us 219 9% 10.2us 400K 835K 1.21M
pleiades24 120us 140us 114 4% 6.33us 208K 434K 642K
pleiades24 140us 160us 63 2% 4.01us 115K 241K 356K
pleiades24 160us 180us 58 2% 4.19us 106K 222K 327K
pleiades24 180us 200us 35 1% 2.85us 63.9K 134K 198K
pleiades24 200us 94 4% 13.2us 172K 359K 530K