err-disable-modify
Physical ports are automatically disabled by NetVisor due to certain violations. For example, if a port receives BPDU messages from an edge port, NetVisor disables the port because receiving BPDUs on a edge port is a security violation. However, there is no way to indicate that the port is shut down because of a violation, and not because of physical link issues.
Syntax err-disable-modify
|
bpduguard|no-bpduguard |
Specify if you want BPDU guard enabled. |
|
macsecurity|no-macsecurity |
Specify if you want MAC recovery enabled. |
|
recovery-timer duration: #d#h#m#s |
Specify the recovery time value. |
Defaults None
Access Network Administrator
History
|
Version 2.6.0 |
Command introduced. |
Usage Use this command to modify port error counters.
Examples To clear port error counters, use the following syntax:
CLI (network-admin@switch) > err-disable-modify