fabric-create
This command is used to create a fabric on the network.
Syntax fabric-create
|
name name-string |
Specify the name of the fabric. |
|
Specify any of the following options: |
|
|
repeer-to-cluster-node cluster-repeer-node name |
Specify if you want to replace a dead cluster node by restoring the switch against the existing cluster node. |
|
vlan vlan-id |
Specify VLAN for the fabric. |
|
password password-string |
Specify the fabric password. |
|
fabric-network in-band|mgmt |
Specify the in-band interface or the management interface to send fabric communications over the fabric. |
|
control-network in-band|mgmt |
Specify the in-band interface or the management interface to send fabric communications over the control plane. |
|
delete-conflicts|abort-on-conflict |
Specify the action to take when there is a conflict with another fabric. |
|
fabric-advertisement-network inband-mgmt|inband-vmgmt|inband-only|mgmtonly |
Specify the network for fabric advertisement. |
Defaults If the multicast address is not specified, a random IPv6 address in the range from ff95::239:4:10:1 to ff95::239:4:10:ff is used as the default fabric multicast address. Unless you specify a password, the default password for the fabric is blank.
Access CLI
History
|
Version 1.2 |
Command introduced. |
|
Version 2.2 |
The parameter mcast-ip deprecated. The parameter vlan added. |
|
Version 2.2.4 |
The parameter network-type added. |
|
Version 2.4 |
The parameter network-type removed. Two parameters fabric-network, and control-network added. The parameter repeer-to-cluster-node added. |
|
Version 2.4.1 |
The parameters fabric-advertisement-network inband-mgmt|inband-only added. |
Usage The fabric consists of one or more switches that share a fabric administrative domain. The fabric presents the abstraction of a big logical switch with a single point of management, hiding the complexity of the underlying collection of switch hardware, and inter-switch links. This command creates the fabric abstraction, but not the switch membership.
Examples To create a fabric named MyFabric with the password b0n3s123
CLI (network-admin@switch) > fabric-create name MyFabric password b0n3s123