igmp-router-show
This command is used to display IGMP routers on the network.
Syntax igmp-router-show
|
node-ip ip-address |
The host IP address. |
|
vnet vnet name |
The host vNET. |
|
bd bridge-domain name |
The host bridge domain. |
|
vlan vlan-id |
The ID of the VLAN. |
|
port port-number |
The number of the port. |
Defaults None
Access CLI
History
|
Version 2.2.2 |
Command introduced. |
|
Version 5.1.1 |
The parameters group-ip, source, node-type, and expires deprecated. The parameters vnet, and bd added. |
Usage Use this command to display information about IGMP routers on the network.
Examples To display information about IGMP routers on the network, use the following command:
CLI (network-admin@switch) > igmp-router-show
node-ip vlan port
------------- ---- ----
10.56.57.1 57 0
192.168.126.1 111 0
55.56.1.2 2001 0
55.56.1.3 2001 272
10.55.56.1 4000 0
10.55.56.2 4000 272
10.59.55.1 4092 10
10.59.55.2 4092 0