igmp-show
To show the Internet Group Management Protocol (IGMP) group membership information for a switch, use this command.
Syntax igmp-show
|
group-ip ip-address |
The multicast group IP address. |
|
node-ip ip-address |
The node IP address |
|
vnet vnet-nam |
Name of the vNET. |
|
vlan vlan-id |
The VLAN identifier. |
|
port port-number |
The port number. |
|
source ip-address |
The multicast source traffic. |
|
node-type host|router|switch |
Specifies if the router is a host, router, or switch. |
|
expires expires-number(s) |
The age out time on the IGMP router. |
Defaults All IGMP group membership information for the local switch is displayed unless a single switch is specified.
Access CLI
History
|
Version 1.2 |
Commmand introduced. |
|
Version 2.4 |
The parameters node-type, and expires added. |
|
Version 2.4.1 |
The parameter host-ip changed to node-ip. The parameter vnet added. |
Usage Use this command to display information about IGMP on the network.
Examples To display all IGMP group membership information for the local switch, use the following command:
CLI (network-admin@switch) > igmp-show
switch group-ip node-ip vnet bd vlan port source node-type expires(s)
------ --------- ------------- ---- -- ---- ---- ------- --------- ----------
switch 239.4.9.3 192.168.25.31 1 272 0.0.0.0 host 272
switch 239.4.9.3 100.3.0.1 1 16 0.0.0.0 host 300
switch 239.4.9.3 100.2.0.1 1 16 0.0.0.0 host 277
switch 239.4.9.3 192.168.25.32 1 0 0.0.0.0 host 300
switch 239.4.9.7 100.3.0.1 1 16 0.0.0.0 host 277
switch 239.4.9.7 192.168.25.31 1 272 0.0.0.0 host 277
switch 239.4.9.7 100.2.0.1 1 16 0.0.0.0 host 241
switch 239.4.9.7 192.168.25.32 1 69 0.0.0.0 host 243
switch 239.4.9.4 100.3.0.1 1 16 0.0.0.0 host 277
switch 239.4.9.4 192.168.25.31 1 272 0.0.0.0 host 277
switch 239.4.9.4 100.2.0.1 1 16 0.0.0.0 host 241
switch 239.4.9.4 192.168.25.32 1 69 0.0.0.0 host 243