igmp-stats-clear
NetVisor OS uses IGMP groups to determine the reception state for a specific multicast address. This allows the switch to determine if any switches need messages sent from a multicast group. Use this command to clear IGMP statistics:
Syntax igmp-stats-clear
|
vlan vlan-id |
Specify the VLAN ID for which IGMP statistics are to be cleared. For multiple VLANs, specify VLAN IDs as a list separated by commas. |
Defaults None
Access CLI
History
Usage This command clears IGMP statistics for the network. The command can be made specific to VLANs.
Examples To clear IGMP statistics for VLAN 1, use the command:
CLI (network-admin@Switch1) > igmp-stats-clear vlan 1