l2-static-multicast-group-delete
This command is used to delete a Layer 2 static multicast group. Hosts join multicast groups either by sending an unsolicited IGMP join message or by sending an IGMP join message in response to a general query from a multicast router (the switch forwards general queries from multicast routers to all ports in a VLAN). When you specify group membership for a multicast group address statically, the static setting supersedes any IGMP snooping learning. Multicast group membership lists can consist of both static, and IGMP snooping-learned settings.
Syntax l2-static-multicast-group-delete
|
group-mac mac-address |
Specify a MAC address for the multicast group. |
|
vlan vlan-id |
Specify a VLAN ID for the multicast group. |
Defaults None
Access network-admin
History
|
Version 2.3 |
Command introduced. |
|
Version 3.0.0 |
The parameter vnet added. |
Usage Use this command to delete a Layer 2 static multicast group.
Examples To delete a L2 static multicast group on MAC address, 0050.3e8d.6400, and VLAN 25, use the following syntax:
CLI (network-admin@switch) > l2-static-multicast-group-delete group-mac 0050.3e8d.6400 vlan 25 ports 10-12