l2-table-flush
This command is used to clear information about the Layer 2 settings.
Syntax l2-table-flush
|
Specify either zero or both options: |
|
|
mac mac-address |
Enter the MAC address. |
|
vlan vlan-id |
Specifies the VLAN identifier. |
|
ports port-list |
Specifies the port list. |
Defaults None
Access CLI
History
|
Version 1.2.1 |
Command introduced. |
Usage Used to flush the Layer 2 information.
Examples To flush the Layer 2 table information from VLAN 25, use the following command:
CLI (network-admin@switch) > l2-table-flush vlan 25