lacp-show
This command is used to display information about Link Aggregation Control Protocol (LACP) configurations on the switch.
Syntax lacp-show
|
switch switch-name |
Name of the switch in the configuration. |
|
enable|disable |
Specifies if LACP is enabled or disabled. |
|
system-priority priority |
The priority for the configuration. The default value is 32768 with a range of 1 to 65535. |
|
system-id id-string |
The ID of the switch in the configuration. LACP uses the system priority with the MAC address to form the system ID, and also during negotiation with other systems. |
Defaults None
Access CLI
History
|
Version 1.2 |
Command introduced. |
Usage Use this command to display information about the LACP configuration.
Examples To display LACP information, use the following syntax
CLI (network-admin@switch) > lacp-show
switch: switch
enable: yes
system-priority: 32768
system-id: 0x8000660e9470e016