lldp-show
This command is used to display Link Layer Discovery Protocol (LLDP) information on the switch. Link Layer Discovery Protocol (LLDP) allows Ethernet network devices such as switches, and routers to receive, and transmit device-related information to directly connected devices on the network that are also using the protocols, and to store the information that is learned about other devices.
Syntax lldp-show
|
Specify any of the following options: |
|
|
local-port local-port-number |
The local port where the LLDP packet is received. |
|
bezel-port bezel-port-string |
The bezel port. |
|
chassis-id chassis-id-string |
The switch chassis ID. |
|
port-id port-id-string |
The port of the switch sending the LLDP packet. |
|
sys-name sys-name-string |
The system name. |
Defaults None
Access CLI
History
|
Version 2.0 |
Command introduced. |
|
Version 7.0.0 |
The Parameter bezel-port added. |
Usage Use this command to display LLDP information on the switch.
Examples To display all LLDP information, use the following command:
CLI (network-admin@switch) > lldp-show
switch local-port bezel-port chassis-id port-id port-desc sys-name
------ ---------- ---------- ----------------- ----------------- ------------------ ----------------------------
switch 8 8 09000fad 8 PN Switch Port(8) spine1
switch 12 12 09000f18 12 PN Switch Port(12) spine2
switch 13 13 00:e0:81:e4:03:6c 00:12:c0:80:1c:04 enp1s0f0 leaf-1c.pluribusnetworks.com
switch 14 13.2 00:e0:81:e4:02:64 90:e2:ba:15:fc:c9 enp1s0f1 leaf-1d.pluribusnetworks.com
switch 15 13.3 00:e0:81:e4:02:64 90:e2:ba:15:fc:c8 enp1s0f0 leaf-1d.pluribusnetworks.com