mac-limit-show
You can now limit the number of MAC addresses per port. You can configure port security only on ports. Details about port security for ports are as follows:
- Access ports—You can configure port security on interfaces that you have configured as Layer 2 access ports. On an access port, port security applies only to the access VLAN.
- Trunk ports—You can configure port security on interfaces that you have configured as Layer 2 trunk ports.
Syntax mac-limit-show
|
port port-list |
The port or port list. |
|
mac-limit mac-limit-number |
The number of MAC addresses to limit on the port. |
|
mac-limit-action log|disable |
The action to take if the MAC address limit is exceeded. |
|
num-macs num-macs-number |
The number of MAC addresses learned on the port. |
Access Network Administrator
History
|
Version 2.6.0 |
Command introduced. |
|
Version 5.1.0 |
The option drop removed from mac-limit-action parameter. |
Usage Use this command to display information about MAC address limits on ports.
Examples To display information about MAC address limits on ports, use the following syntax:
CLI (network-admin@switch1) > mac-limit-show
switch port mac-limit mac-limit-action num-macs
------- ---- --------- ---------------- --------
switch1 1 0 log 0
switch1 5 0 log 0
switch1 9 0 log 0
switch1 13 0 log 0