mld-static-group-show
Multicast Listener Discovery (MLD) is a Layer 3 multicast protocol used between IPv6 hosts, and routers similar to how IGMP is used for IPv4. MLD snooping allows a switch to examine MLD packets, and make forwarding decisions based on their content.
MLD snooping constrains IPv6 multicast traffic at Layer 2 by configuring Layer 2 LAN ports dynamically to forward IPv6 multicast traffic only to those ports that want to receive it.
The default behavior, when MLD Snooping is not configured, multicast traffic is forwarded to all the switch ports, impacting switch performance.
Syntax mld-static-group-show
|
group-ipv6 ip-address |
Name of the IP group for the MLD configuration. |
|
vnet vnet-name |
The vNET name. |
|
vlan vlan-id |
The ID of the VLAN for the MLD configuration. |
|
ports port-list |
The number of the port for the MLD configuration. |
Defaults None.
Access CLI
History
|
Version 2.3 |
Command introduced. |
|
Version 2.4.1 |
The parameter vnet added. |
Usage When MLD Snooping is not configured, multicast traffic is forwarded to all the switch ports, impacting switch performance.
Examples To display MLD parameters for the local switch, use the following command:
CLI (network-admin@switch) > mld-static-group-show