port-association-modify
This command is used to modify port associations.
Syntax port-association-modify
|
name name-string |
Specify a name for the port state association. |
|
Specify one or more of the following options: |
|
|
master-ports port-list |
Specify a list of ports to act as master ports. |
|
slave-ports port-list |
Specify a list of ports to act as slave ports. |
|
policy all-masters|any-master |
Specify a policy for the port association. The default is all-masters. |
|
virtual-wire|no-virtual-wire |
Specify if you want the associated ports to form a “virtual wire”. Once you put the switch into virtual wire mode, you disable all other features on the switch. |
|
bidir|no-bidir |
Specify if you want the port state tracking to be bi-directional or not. |
|
monitor-ports port-list |
Specify a list of ports not used by port association to monitor. |
|
enable|no-enable |
Specify if you want to enable port association in hardware. |
Defaults None
Access CLI
History
|
Version 2.2.6 |
Command introduced. |
|
Version 2.4 |
The parameter virtual-wire, and bidir added. |
|
Version 2.5.2 |
The parameter monitor-ports added. |
|
Version 3.0.0 |
The parameter enable added. |
Usage Use this command to modify port associations.
Examples To modify a port association, ports-assoc, and change the slave port list to 71-72, use the following command:
CLI (network-admin@switch) > port-association-modify name ports-assoc slave-ports 71-72