port-association-path-show

The Inline Service feature manages service chains for Layer 1 Virtual Wire switches. The term, Inline Services, refers to services attached to a Layer 1 Virtual Wire switch such as Next-Generation Firewall (NGFW), Intrusion Detection System (IDS), Intrusion Prevention System (IPS), and Distributed Denial of Service attack (DDoS) Prevention.

When an Inline Service fails, a policy determines if traffic is allowed to bypass the Inline Services or if the traffic is blocked until the Inline Services recovers.

This command is used to display a port association path configuration.

Syntax   port-association-path-show

name name-string

Name for the port association to apply the service.

topology topology name

Fabric topology name.

node1 fabric-node name

Name for the link node 1.

node1-port node1-port-number

The port on the node 1.

node2 fabric-node name

Name for the link node 2

node2-port node2-port-number

The port on the node 2.

status down|up

The path status.

path path-string

The path string.

Defaults   None

Access   Network Administrator

History   

Version 2.6.0

Command introduced.

Usage   Use this command to display a port association path configuration.

Examples  To create a port association path from switch1 to switch2, use the following syntax:

CLI (network-admin@switch) > port-association-path-show name path1

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south