port-egress-show
Use this command to display information about fabric communications when a connection error occurs while using show commands.
Syntax port-egress-show
|
port port-list |
The physical port list. |
|
egress port-list |
The allowed egress ports. |
|
rx-only port-list |
The receive only ports. |
|
active-active-vlags port-list |
The active-active VLAG ports. |
|
loopback port-list |
The loopback ports. |
|
mir_prevent_out port-list |
The ports not participating in mirroring traffic. |
|
no-local-switching port-list |
The ports that are impacted by the no-local-switching command. |
Defaults None
Access CLI
History
|
Version 2.3 |
Command introduced. |
|
Version 2.5.3 |
The optional parameter, local-switching|no-local-switching added. |
|
Version 2.6.2 |
The parameter local-switching, deprecated. |
Usage Occasionally, the fabric returns a communication error when show commands are executed at the CLI. This command displays communication on fabric ports.
Examples To use this command, use the following syntax:
CLI (network-admin@switch) > port-egress-show
switch port egress rx-only active-active-vlags loopback mir_prevent_out no-local-switching
------ ---- ------ ------- ------------------- -------- --------------- ------------------
switch 1 0-72 none none none none none
switch 2 0-72 none none none none none
switch 3 0-72 none none none none none
switch 4 0-72 none none none none none
switch 5 0-72 none none none none none
switch 6 0-72 none none none none none
switch 7 0-72 none none none none none
switch 8 0-72 none none none none none
switch 9 0-72 none none none none none
switch 10 0-72 none none none none none
...
Informational Note: The port egress values may vary from platform to platform.