port-force-linkup-add
This command is used to add port(s) for link-up.
Syntax port-force-linkup-add
|
port-id port-id-number |
Specify the ports allowed for force link-up. |
|
mode tx|rx |
Specifies the RX or TX side of the port. |
Defaults None
Access Network Administrator
History
|
Version 7.0.0 |
Command introduced. |
Usage Use this command to add port(s) for linkup.
Examples To add port(s) for linkup, use the following syntax:
CLI (network-admin@switch)1 > port-force-linkup-add