port-storm-control-show
This command is used to display information about storm control on a port.
Storm control prevents traffic on a LAN from disruption by a broadcast, multicast, or unicast storm on a port. A LAN storm occurs when packets flood the LAN, creating excessive traffic, and degrading network performance.
Syntax port-storm-control-show
|
port port-list |
A port or a list of ports. |
Defaults None
Access CLI
History
|
Version 2.2.3 |
Command introduced. |
Usage Use this command to display information about ports configured for storm control.
Examples To display information about storm control, use the following syntax:
CLI (network-admin@switch) > port-storm-control-show
switch port speed unknown-ucast-level unknown-mcast-level broadcast-level trunk
------ ---- ----- ------------------- ------------------- --------------- --------
switch 1 10g 30% 30% 30%
switch 2 10g 30% 30% 30%
switch 3 10g 30% 30% 30%
switch 4 10g 30% 30% 30%
switch 5 10g 30% 30% 30%
switch 6 10g 30% 30% 30%
switch 7 10g 30% 30% 30%
switch 8 10g 30% 30% 30%
switch 9 10g 30% 30% 30%
switch 10 10g 30% 30% 30%
switch 11 10g 30% 30% 30%
switch 12 10g 30% 30% 30%
switch 13 10g 30% 30% 30%
switch 14 10g 30% 30% 30%
switch 15 10g 30% 30% 30%
switch 16 10g 30% 30% 30%
switch 17 10g 30% 30% 30%
switch 18 10g 30% 30% 30%
switch 19 10g 30% 30% 30%
switch 20 10g 30% 30% 30%
switch 21 10g 30% 30% 30% auto-274
switch 22 10g 30% 30% 30% auto-274