running-config-show

This command displays information about the current configuration on the switch.

Syntax   running-config-show

Defaults   None

Access   CLI

History   

Version 1.2

Command introduced.

Version 2.5.3

vNET administrator-related information displays when a vNET administrator runs this command.

Usage   Displays information about the current configuration on the switch.

Examples  To display the configuration, use the following command:

CLI (network-admin@switch) > running-config-show

The output is lengthy, and includes port information, IP addresses, vNETs, and so on.

To view vNET administrator information:

  1. Enable running-config for the vNET admin role, (vnet1-admin):

CLI (network-admin@switch) > role-modify name vnet1-admin running-config

  1. Log into the vNET, as vnet1-admin, and run the running-config-show command:

CLI vnet1-admin@switch > running-config-show

storage-pool-create name pool-disk2 device1 disk2

storage-pool-create name test

vnet-manager-modify name vnet1-mgr enable

vnet-manager-service-modify vnet-manager-name vnet1-mgr if eth0 web

storage-hapool-create name hapool1 local-pool pool-di hapool-peer-pool

pool-disk4 backup-interval 1m

north
    keyboard_arrow_up
    keyboard_arrow_down
    description
    print
    feedback
    support
    business
    rss_feed
    south